Replacement Bearings, Hub, and Brakes for Lippert 4,400 lb Axle
Updated 12/22/2025 | Published 10/26/2024
Products Featured in This Question
Question:
Looking to replace Brakes, Hub and Bearing for Lippert 4,400 axle.
asked by: David
(click to enlarge)
Expert Reply:
Hi David; your 4,400 lb Lippert axle actually has a 5,200 lb spindle it just has a lower rating. This is good news since 4,400 lb axles are obsolete and parts aren't always available. The outer bearing is the # LM67048 and inner bearing is # 25580 with a # GS-2250DL (10-36) grease seal.
For a hub and drum assembly you can use the # AKHD-655-6-EZ-K. This is pre-greased with a 6 on 5-1/2 bolt pattern and includes the bearings and grease seal. If you happen to look at the outer bearing for this hub it is actually the # 15123 but it has the same 1.25" inner diameter so it still fits your spindle. For brakes you can use the # AKEBRK-7-SA and then the # BRKH12 if you need new brake mounting hardware.
Product Page this Question was Asked From
Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 4400 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Video: Checking Out the Dexter Trailer Idler Hub Assembly for 5,200-lb Axles
- Q&A: Which Replacement Hubs and Bearing Kit Fits Older Axle W/ LM67048 and 25580 Bearing Combination
- Q&A: Replacement Brakes and Hub Assemblies for Lippert 5,200 Pound Axle
- Q&A: Dexter vs. etrailer 7,000 lb Electric Trailer Brakes
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Left and Right Replacement Brake Assemblies For AXLETEK-12-GG Electric Trailer Brakes
- Search Results: b12ea~22
- Search Results: lm67048
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2
- Shop: Westlake ST205/75R15 Trailer Tire with Glossy Black Eagle Aluminum Wheel - 5 on 4-1/2
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Search Results: for 5200 lbs axles trailer hubs and drums
- Q&A: What Would Cause Grease to Appear All Over Trailer Wheels on 3 Trailers
- Q&A: Replacement Brakes and Hubs For Axle-Tek 12-GG Axle
- Video: Lippert Electric Trailer Brake Assembly Feature Review
- Search Results: axletek bd2 655
- Search Results: lippert trailer bearings races seals caps
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
on Accessories and Parts
Robin H.
12/22/2025
Hey David, how did the new hub, bearings, and brakes work out on your Lippert axle? Your update could make it easier for the next person trying to replace parts on a 4,400‑lb setup.