Solution for Mounting Spare Tire on Cargo Trailer With 6" x 2" Frame
Updated 10/21/2024 | Published 10/19/2024
Products Featured in This Question
Question:
Hello, does anyone make a spare tire rack for a cargo trailer with a 6 high x 2 wide frame? For reference, its an ITI 20 x 8 10,000 GVW cargo trailer. Id like to mount the tire on the front right tongue A frame. Thank you.
asked by: Jerry M
Expert Reply:
Hi Jerry; the only spare tire carrier that may fit your 6" x 2" frame is the CE Smith Spare Tire Mount # CE22011Z-11050-2. This can fit a frame up to 3" wide so you could lay the tire on top of the frame to mount it. The mount is 12-1/4" long so you will have to determine if it can make it around the 6" frame and through the wheel which will depend on your tire width and wheel offset.
The Demco Trailer Stake Pocket Spare Tire Mount # DM15850-52 you looked at could also be an option. This would require adding a stake pocket like # PK-BSP or # TSW-A1800. If you don't mind adding the stake pocket to your frame this would be the best option.
You could also mount it inside the trailer if it is an enclosed trailer. If you can sit it on the floor somewhere the # EM77316 is a good option. You can also mount it up on a wall using the Rack'Em Spare Tire Mount for Enclosed Trailers # RA-16.
Product Page this Question was Asked From
Bumper Spare Tire Mount - U-Bolt Mount
- Spare Tire Mount
- Bumper Mount
- Bolt-On
- 5-Bolt
- 6-Bolt
- 8-Bolt
- RV
- Standard Finish
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: spare tire mount
- Video: All About the etrailer Spare Tire Mount for Trailer with Angle-Iron Railing
- Shop: etrailer Spare Tire Mount for Trailer with Angle-Iron Railing - Clamp On
- Search Results: stake pocket
- Shop: Risk Racing Lock-N-Load Junior Strapless Dirt Bike Transport System - 200 lb
- Search Results: trailer spare tire mount
- Video: Feature Breakdown: Curt Stake Pocket for Flatbed Trucks or Trailers
- Shop: Trailer Weld-on Stake Pocket - 7 Gauge
- Shop: Rack'Em Heavy Duty Stake Pocket for Flatbed Truck or Trailer - Bolt On - Steel - Qty 1
- Shop: Curt Stake Pocket for Flatbed Trucks or Trailers - Weld On - Qty 1
- Shop: Roadmaster Rollaway Trailer Hitch Protector
- Video: Breaking Down the Demco Spare Tire Mount for up to 4" Tall Trailer Tongue
- Shop: Demco Spare Tire Mount for Bolt-On Swivel Jack - Black
- Q&A: Can I Install A Propane Tank Inside A Tongue Mounted Toolbox?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Kenda ST205/75R14 Radial Trailer Tires AM32161 And KE75EV
- Q&A: Black Spare Tire Cover Recommendation for Triangle 215/75R17.5 Radial Tire w/ 17-1/2" Solid Wheel
- Q&A: Will A Spare Tire With A Higher Load Rating Be Ok On A 2022 Aluma 7814ST?
- Q&A: Do Kenda Karrier Trailer Wheel And Tire Combo KE69JV Come Pre Balanced?
- Q&A: Spare Wheel and Tire Carrier Recommendation for Jayco Redhawk Class C Motorhome
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Q&A: What is the Difference Between the ST205/75R14 Kenda Karrier KR53 and the Kenda Karrier Tires?
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
Jerry M.
10/21/2024
Thank you Robin. Very helpful and much appreciated.