Parts Needed for Garage Storage Of A Polaris 600Indy XC 129
Updated 12/22/2025 | Published 10/16/2024
Products Featured in This Question
Question:
I want to be able to store my Polaris 600 Indy XC 129 in my garage without leaving it on the trailer. Am I able to mount these glides to my garages concrete floor or do you have a better idea?
asked by: Christopher N
Expert Reply:
Hey Christopher,
You could mount some Caliber MultiGlides Snowmobile Trailers # CA26TJ to the floor of your garage but you'd need to drill some holes in the concrete and use some anchors so the screws have something to mount to. Personally, I would just pick up the Caliber Snowmobile Dolly Kit # CA36AJ, which you can load the snowmobile onto and then easily roll around your garage to make room.
This dolly kit has an 800lb capacity, which is well over what your Polaris weighs. The center of these dollies can accommodate keels up to 2.5" and the included straps will help prevent the dollies from popping out from under the Polaris.
Product Page this Question was Asked From
Caliber MultiGlides for Snowmobile Trailers - 6-1/4" Wide x 60" Long - Qty 4
- Snowmobile Trailer Parts
- Traction Surface
- Glides
- 4 Pack
- 6-1/4 Inch Wide
- 60 Inch Long
- Caliber
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Caliber Rover 360 Snowmobile Casters - Qty 3
- Video: Review of Caliber Winter Weather Supplies - Rover 360 Snowmobile Dolly Kit Qty 3 - CA36AJ
- Shop: Velit 3000R AC for Vans, Travel Trailers, and Small RVs - Ductless - 12,000 Btu - 48 V DC - White
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Maxtrax Xtreme Recovery Boards - Tan - 9,900 lbs - Qty 2
- Video: In-Depth Review of the Bulldog Winch Heavy Duty Portable Air Compressor
- Shop: Bulldog Winch Heavy Duty Portable Air Compressor - 125 psi - 14 cfm Maximum Air Flow
- Shop: Windshield Covers
- Video: Review of the Redarc In-Vehicle BCDC Trailer Battery Charger
- Video: Checking Out the Curt Wheel Chock Set w/ Handles and Mounting Brackets
- Video: Manufacturer Spotlight - Maxtrax Recovery Boards
- Shop: Redarc In-Vehicle BCDC Trailer Battery Charger - Dual Input - DC to DC - 12V - 12 Amp / Solar 40 Amp
- Shop: Curt Wheel Chock Set w/ Handles and Mounting Brackets - Solid Rubber - Qty 2
- Q&A: Dimensions And Installation For The Caliber Snowmobile Grips Kit # CA46TJ
- Q&A: Replacement ST145/R12 Tires and Wheels for 2012 Triton Trailer
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: Replacement Bearings, Hubs, and Brake Assemblies for a Apex Nano w/ 3,500 lbs Axles
- Q&A: Will Fulton Tandem Trailer Fender # F008583 Fit Shoreland'r Tandem Axle Trailer
- Q&A: Weight Capacity of Caliber Edge Glide 2.0 Transition Plate for Enclosed Trailers
- Q&A: Trailer Wheel with 5 Bolt Pattern that Fits Tire Size 18.5x8.50-8
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Change a Trailer Tire
Jesse M.
12/22/2025
Hey Christopher, how did things go with the Caliber Snowmobile Dolly Kit for your Polaris? Your results could really help others trying to store their sleds in tight garage spaces.