Is There Storage Bag that Fits Trailer Valet XL

Question

Question:

I would like to be able to have some kind of carrier for the trailer valet xl, like a very sturdy bag. Can you recommend something?

asked by: Marius

0

Expert Reply:

Hey Marius, so we don't have a storage bag for the Trailer Valet part # TVXL2 but if you were going to source one it would need to be able to handle 60 lbs and also be able to carry the unit which measures 26 inches by 17-1/2 inches since that is overall dimensions of the jack. Maybe like a larger luggage that has wheels to make moving it easier?

expert reply by: Jameson C

0

Answer 1

Typically it's the tires of a utility trailer that get problematic if stored for long periods of times. Although there are not exact rules for how to store a trailer tire. Our experience shows that the most beneficial way to store a trailer tire…

view full answer...

Answer 2

The Trailer Valet 5X, #STC-V211 is a jack that is mounted to your trailer with a bolt-on bracket and therefore, is designed to be used with just the one trailer to which it is attached. It does not come equipped with the ball base, so a ball cannot…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Is There Storage Bag that Fits Trailer Valet XL

Product Page this Question was Asked From

Continue Researching