bing tracking image
Q & A Icon

How To Install A Boat Winch Strap On The Dutton-Lainson Hand Winch # DL15403  

Updated 12/22/2025 | Published 10/09/2024

Question:

How do you mount the strap and can you use any 2, strap?

0

Expert Reply:

Hey Dennis,

The Dutton-Lainson Hand Winch # DL15403 has slots in the reel side plates for a bolt to slip through and the strap to be sewn around. You'd want to use a 3/8" x 3-1/4" long bolt with a locknut and sew a loop into the end of the strap to slip over that bolt. Dutton-Lainson recommends using a 2" strap with a hook with both components having a 1.5 times capacity of the winch. We offer the # DL24249 which would exceed these requirements and comes with mounting hardware.

I've attached a short video below where you can see how AJ installs this strap on a similar boat winch.

expert reply by:
0
Kevin C
Jerred H. profile picture

Jerred H.

12/22/2025

Hey Dennis, how did things go mounting the strap on your Dutton-Lainson hand winch? Did the 2-inch strap with the safety hook fit the way you needed? Your update could make it easier for the next person setting up the same winch.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>