Is There Such Thing As A Weight Distribution Hitch For An I-Beam Tongue?
Updated 12/22/2025 | Published 10/04/2024 >
Products Featured in This Question
Question:
is there such a thing as a weight distribution hitch for an i-beam tongue?
asked by: Ronald G
Expert Reply:
Hey good question Ronald. Weight distribution hitches are made for A-frame trailers, but it is possible to use one on an I-beam tongue. What you do is use a pole tongue adapter like the Blue Ox Pole Tongue Weight Distributing Hitch Adapter # BXW4023. This bolts on to the straight tongue and gives you the outward attachment points for the WD system. I included a few pictures below to show you examples of what that will look like.
The adapter I mentioned is made to work with the Blue Ox SwayPro Weight Distribution hitch like part # BXW0550. This WD system is intended for trailers with a tongue weight between 350 and 550 lbs. If you can tell me the tongue weight of your trailer, I can make sure you get the right system.
Continue Researching
- Q&A: Compatibility of Fastway FA94-00-1000 Weight Distribution Kit with Blue Ox BXW40 Pole Tongue Adapter
- Q&A: Recommended Pole Tongue Adapter for Chain Hanger Weight Distribution System
- Q&A: Weight Distribution for Supertruss Extenssion and Boat Trailer With 450 lb Tongue Weight
- Video: Review of Blue Ox Weight Distribution Hitch - Replacement L-Bracket Plates - BLU42QR
- Video: Breaking Down the Chain Hangers for Curt Weight Distribution Systems
- Video: The Low-Down on the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems
- Search Results: weight distribution hitch
- Search Results: pole tongue adapter
- Shop: Blue Ox Signature Series Underclamp Lift Brackets for SwayPro Weight Distribution Systems - Clamp On
- Shop: Blue Ox Pole Tongue Weight Distributing Hitch Adapter
- Shop: Blue Ox Signature Series Lift Brackets for SwayPro Weight Distribution Systems - Clamp On or Bolt On
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Shop: Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Video: Review of Blue Ox SwayPro Underclamp Lift Brackets - BXW4020
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Replacement L-Brackets w/ Mounts for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2
- Video: Review of MORryde Trailer Leaf Spring Suspension - Equalizers - MR27ZR
- Video: Blue Ox Lift Brackets for SwayPro Weight Distribution Systems Manufacture Demo
- Video: Feature Breakdown: Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems
- Shop: Suspension Enhancement
- Q&A: Can a Weight Distribution System be Used on an I Beam Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer wiring


Jesse M.
12/22/2025
Hey Ronald, how did things go with the Blue Ox pole tongue adapter and SwayPro hitch for your I-beam trailer? Your update could make it easier for the next person trying to set up a similar weight distribution system.