2 inch Lift Kit for 2024 Cougar 30BHS and Shock Kit
Updated 10/02/2024 | Published 09/25/2024
Products Featured in This Question
Question:
I have a 2024 cougar 30BHS and would like to lift it 2”. I would prefer to replace my springs to get the 2” lift. Do you offer anything. The axles are lippert 4400 lb axles. Would also like to replace the equalizer. The one I have is a cast iron one. What do you offer for a shock installation as well. Thanks for the help.
asked by: James U
Expert Reply:
Hey James, so we can definitely help lift your trailer right at 2 inches with the Correct Track Lift kit part # RR23QX but we don't have a way to do that with leaf springs.
To replace your equalizer I would need to know what equalizer dimensions you have now. Basically the distance from left to right on the mounting holes as well as the distance from the top hole down to the bottom holes.
We have shock kits too like the part # LC281255 which fits the 2-3/8 inch diameter axle you have.
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How to Lift a 5th Wheel Trailer
- Article: How to Raise Your Travel Trailer Height
- Q&A: Recommended Gooseneck Pin Box Adapter
- Q&A: 2024 Forest River Wildwood X-Lite 273QBXL
- Q&A: Replacement Option For Norcold N306.3 RV Fridge
- Q&A: Will MORryde ALLTREK 4000 Add Height To 2026 Alliance Avenue 32RLS
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
James U.
10/2/2024
With all the hanger issues with cracked welds and such are there any concerns with the forces in the hangers being that it is lowering the pivot point causing more stress on the welds? Would a 2” block on the axle be a stronger installation and help elucidate any warranty issues?