Recommended Pace Edwards Contractor Rig Rack for a 2021 Ford F-250 With an 8' Bed

Question

Question:

Does this rack fit a 2021 F-250 Super Duty 8 foot bed?

asked by: Raymond M

0

Expert Reply:

Hey Raymond, yes the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack # 311-CR6005 does fit your 2021 Ford F-250 Super Duty with an 8' bed.

expert reply by: Bryce D

0

Jesse M.

1/5/2026

Hey Raymond, how did the Contractor Rig Rack end up fitting on your F-250’s 8-foot bed? Knowing how it worked out could help others looking at the same setup.

Answer 1

Depending on the style of cab you have there are two different options: For a standard cab you'll need the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR3008. For an extended cab you'll need the Pace Edwards Contractor Rig…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 11

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Answer 12

Hey Trevor, nice truck and trailer! For your 2024 Ford SuperDuty truck, you can definitely go with either option: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-127-47 (1,500lb capacity) - SumoSprings Solo Custom Helper Springs - Rear Axle…

view full answer...

Recommended Pace Edwards Contractor Rig Rack for a 2021 Ford F-250 With an 8' Bed

Product Page this Question was Asked From

Continue Researching