Is There a 7k Hub/Drum that Can Convert Trailer Hub to Oil Bath
Updated 01/12/2026 | Published 09/06/2024
Question:
I have an alliance 310RL Paradigm 2022 model. 7000 LB Dexter axle with 16 in tire. I would like to install oil bath drums. I dont see any listed for my unit. Last of VIN NA004511. Thanks for your help
asked by: Jim M
0
Expert Reply:
Hey Jim, for a 7k trailer axle we do have the Dexter hub part # 8-219-9UC3-A that is an oil bath setup like you are wanting. The wheel bolt pattern is 8 on 6-1/2 inch which should be what you have as well. It comes with the needed oil seals and new bearings as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: slipper springs trailer leaf springs
- Search Results: trailer suspension parts
- Search Results: dexter oil cap
- Search Results: truryde trailer brakes
- Search Results: dexter trailer axles
- Search Results: national 412920
- Search Results: trailer bearings races seals caps
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Q&A: Replacement for a Dexter 072-032-00 Slipper Spring
- Shop: Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles and DeeMaxx 8K Oil Bath Idler Hubs
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Shop: 5-Leaf Slipper Spring for 7,000-lb Trailer Axles - 26-1/2" Long - EMCO
- Video: Feature Breakdown: Dexter Trailer Hub and Drum Assembly for 8,000-lb Axles
- Video: Breaking Down the Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Q&A: Hub Recommendation to Convert Dexter 7k Axle to Oil Bath
- Q&A: What's Difference Between Trailer Hubs # 8-219-9UC3 and # 8-219-9UC3A
- Q&A: How to Determine if a 7K Dexter Trailer Axle Hub has 1/2 Inch or 9/16 Inch Studs
- Q&A: Increasing Ground Clearance on Trailer with Drop Spindles
- Q&A: How To Properly Measure Slipper Springs For Your Trailer's Leaf Sping Suspension
- Shop: Dexter Fortress Threaded Aluminum Oil Cap for 5.2K to 8K Axles
- Shop: Spring Keeper Bolt with Locknut for Slipper Springs - 3-1/4" Long
- Q&A: Can 16 inch Trailer Wheel/Tire be Upgraded to 17.5 inch Diameter
- Video: Measuring To Choose The Right Trailer Axle
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
Jameson C.
1/12/2026
Hey Jim, how did the oil bath hub and drum setup work out on your Alliance Paradigm? Your update could make it easier for others upgrading their 7k Dexter axles too.