How to Remove Air Hose From Air Bag in Air Lift LoadLifter 7500 XL Air Helper Springs Kit

Question

Question:

how do you remove the air hose from the air bag if its leaking?

asked by: David S

0

Expert Reply:

Hey David, thanks for reaching out!

To remove the air line from the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57531 you'll need to move the collar on the connector back (probably using pliers) and then pull the line free.

If you need some replacement air line tubing we have some available in a 20' Long Pack # AL63RV as well as a 50' Long Pack # AL23RV. Be sure to use an Air Hose Cutter # AL10530 to trim any pieces off so you have a clean cut and can install the air line into the bag without issues.

expert reply by: Jon G

0

Answer 1

The Air Lift LoadLifter 7500 XL #AL57531 that you referenced has a max psi range of up to 100 psi and can provide 7,500 lb of additional suspension support. I will say that at 100 psi your suspension will be incredibly stiff.

view full answer...

Answer 2

I have an air bag solution for you. Unfortunately, if you have a 2022 Ram 3500 CA60 chassis cab, the Air Lift LoadLifter 7500 XL #AL57531 will not fit. This is because these air bags are only designed for standard pickup models. However, we do have…

view full answer...

Answer 3

You are going to want a heavy duty air spring system for your 2020 Ram 3500 crew cab. I recommend the Air Lift LoadLifter 7500 XL Air Helper Springs item #AL57531 you were looking at. This is our highest rated system and fits both the 2WD and 4WD…

view full answer...

Answer 4

Hey Jukius, we do have the Rhino Rack ROC25 roof rack part #RR56RR as a confirmed fit for your 2010 Volkswagen Golf City. This would be what I would recommend for your vehicle. What are you planning on carrying with this rack?

view full answer...

Answer 5

Hey Ted, yes the Westin HDX grille guard aprt #W32YC would block the sensors and camera on your 2025 Ford F-350. I wish there was a way around that but since modern truck all have so many sensors these guards do interefere.

view full answer...

Answer 6

Hey John congrats on the new truck! To add a set of air bags to your 2025 Ram 3500, I recommend the Air Lift LoadLifter 7500 XL Air Helper Springs item #AL57531. These fit both the 2WD and 4WD models and have a 7,500 lbs load leveling capacity. All…

view full answer...

Answer 7

The total weight of the B and W Companion Slider Hitch part #BWRVK3370 that you referenced is 266 lbs.

view full answer...

Answer 8

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hey Jake, thanks for reaching out! You'll actually want to keep the OEM hitch on your 2005 GMC Sierra 2500 to install some TorkLift tie-downs as there aren't any TorkLift tie-downs that fit with the SuperHitch Original #TLC1204. For your OEM…

view full answer...

How to Remove Air Hose From Air Bag in Air Lift LoadLifter 7500 XL Air Helper Springs Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching