What PSI Should Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel be Inflated to
Updated 09/10/2024 | Published 09/04/2024
Question:
Whats the normal recommended operating tire pressure for this tire/wheel combination? Thank you.
asked by: Andy F
0
Expert Reply:
Hey Andy, the trailer wheel and tire part # AM30670 should be inflated to 90 psi when cold under all circumstances and you'll be fine. Unlike on vehicles with trailer tires they need to be inflated to the max psi rating at all times so that you get the full weight capacity and prevent heat buildup which leads to failure.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Continue Researching
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Search Results: trailer axles
- Shop: Taskmaster 4.80R12 Radial Trailer Tire - Load Range C
- Q&A: Correct Inflation Pressure for Trailer 4.80-12 Trailer Tires
- Shop: Steel Spoke Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Galvanized Finish
- Search Results: axle flip kit
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Can Tire Size be Increased on Jet Ski Trailer with 2" of Tire-to-Fender Clearance
- Q&A: What Should Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30670 Inflate to
- Q&A: What 4.80-12 Tire on Galvanized Wheel do You have for My Boat Trailer Used on Sometimes Saltwater?
- Search Results: air pump
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: A Closer Look at the Quick Splices
- Search Results: marker lights
- Search Results: quick splice connectors wiring
- Shop: Trailer Wiring
- Q&A: Upgrading Lights on 2000 Tracker PT175 Trailer to LED
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-1/4" Long
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Shop: Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM30670
- Article: Trailer Tire Sizing
- Search Results: trailer boxes
- Search Results: trailer jack
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR
- Video: Comprehensive Review: Optronics LED Clearance or Side Marker Light
- Video: All You Need to Know About the Optronics LED Clearance or Side Marker Light
Andy F.
9/10/2024
Thank you, these are actually only going to be used to get my trailer into my storage building because they're shorter than the tires I run on the road. I need the two inches shorter and I'm good, thanks.