Replacement Front End Rubber Plug for Grease Cap
Updated 01/12/2026 | Published 09/02/2024
Products Featured in This Question
Question:
Is it possible to purchase the front grease seal for the axle? Its the front seal that covers the zert.
asked by: Glen M
0
Expert Reply:
Hey Glen, great to hear from you again!
Yes, you can replace the front cover/seal for the 3.5K Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K is part # DC200L-DCRP.
If you just need the rubber plug on the end of the cap then you need part # DC-RP.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
Lazer S.
1/12/2026
Hey Glen, how did things go with the new front seal for your Easy Grease trailer hub? Did the replacement fit the way you needed? Your feedback could help others working on the same hub setup.