Parts Needed To Put Two Hullavators On A 2018 Jeep Wrangler JL Unlimited

Question

Question:

What parts do I need to install two hulivators on a 2018 wrangler JLU?

asked by: Chuck C

0

Expert Reply:

Hello Chuck. The best option for mounting two Thule Hullavators # TH898 on your 2018 Jeep Wrangler JL Unlimited will be to use the Rhino Rack Roof Rack # RR94ME. This is complete roof rack system so you get your crossbars, gutter mount legs and installation hardware. The Hullavator requires crossbars that extend past the towers between 4"-8".The Rhino Rack crossbars I recommended are extra-large 65" long so they will have sufficient overhang past the towers on both sides.

expert reply by: Jesse M

0

Chuck

9/4/2024

I found a friend with hullavators and square tubes Now I need matching short drip rail feet. Please help

Jesse M.

9/4/2024

@Chuck Hey Chuck. The 4 pack of Thule gutter feet is part # TH33ZR. Are the square tubes you are referring to the Thule square crossbars? If so, please verify that they are the new style Thule square bars. The new style bars have a bottom channel for mounting to the feet. The old style bars do not have the bottom channel so I wouldn't have a way for you to mount those. If they are the new style bars, you will need to be sure they are long enough for your vehicle to support the Hullavator. The crossbar needs to extend past the tower by 4"-8".

Chuck C.

9/4/2024

@JesseM I believe they are solid-no groove. Thank you

Jesse M.

9/5/2024

@ChuckC Those are the old style Thule square bars. So, they will not work with the # TH33ZR gutter feet I mentioned. The old style square bars are basically obsolete. You will need to get a new set of bars.

Answer 1

Yes, the Thule Chariot Cross Bike Trailer, Stroller, and Jogger #TH10202014-302 comes with the standard equipment for biking as well as the adapter kit to change it over to a jogging stroller. I am attaching a link to some accessories we carry for…

view full answer...

Answer 2

Yes, we do Jorge! To get the straps for a Thule Upride item #TH599000-FB you'll want the Fat Bike Adapter item #TH599100. The straps are built into the adapter you can't purchase just the straps. What kind of bike do you have?

view full answer...

Answer 3

For a Thule bike rack model 515-0109 the best options for replacement cradle straps are going to be strap #05002200000 or #853-2569 since the part number you mentioned is no longer made. This is a very similar square hole strap that will work well…

view full answer...

Answer 4

Unfortunately, the only way to obtain the U-bolts for the Thule 674 Evolution cargo box is to purchased what they refer to as the Hardware Bag, part #TH05820. I feel for you, the kit is expensive but if the box is still in overall good condition…

view full answer...

Answer 5

Yes, it just depends on what box you have. If you have the Thule Weekender Cargo Box the correct replacement hardware is #1032802. If you have the Thule Adventurer Cargo Box the correct replacement hardware is #TH04997.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 10

Hey Abelardo, thanks for reaching out! For the Sky One Touch roof, fitment options are much more limited than a standard hardtop Wrangler. Right now the only roof rack we have confirmed to fit your 2026 JL Rubicon X with the Sky One-Touch roof is the…

view full answer...

Answer 11

Hey Cory, yes the Rhino Rack feet part #RL210S2 is the correct part to use as a foot kit for your 2022 Jeep Wrangler Rubicon with the Sky One Touch top. For a complete roof rack that uses those feet you'd want the part #RR55CG which comes with…

view full answer...

Answer 12

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Parts Needed To Put Two Hullavators On A 2018 Jeep Wrangler JL Unlimited

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching