Will Replacement Locking Lever Latch and Keys for Thule RodVault Fit Denver Outfitter 4 Vault

Question

Question:

I have an older Denver Outfitter 4 vault . The lock completely fell out. Will the Thule one work even though I do not see anyplace for a screw

asked by: Janice C

0

Expert Reply:

Hi Janice; the Replacement Locking Lever Latch and Keys for Thule RodVault # TH85ME will fit your Denver Outfitter 4 Vault. The screw is part of the lever and doesn't attach to anything else. If you look up old pictures of the Denver Outfitter you can see that piece with the screw sticking out is on the lever latch.

expert reply by: Robin H

0

Robin H.

1/27/2026

Hey Janice, how did the new locking lever latch work out on your Denver Outfitter 4 Vault? It’d be great to know if it fit securely with the built-in screw design. Your update could make it easier for others with the same vault.

Answer 1

Hey John, I've had a similar question to this before and what I was able to find is that what you'll have to do is replace the entire locking assembly with the part #TH85ME that you referenced as there isn't a key replacement available.

view full answer...

Answer 2

As you have the older Rod Vault from Denver Outfitters you will need the Replacement Latch and Keys #TH85ME. This is needed as the key alone will not work as a replacement for the Original Rod Vaults before they were acquired by Thule.

view full answer...

Answer 3

Since you have an older model from before Thule acquired this fishing rod holder the only way to get a replacement key would be secondhand. You can however replace the entire lock assembly with the Replacement Locking Lever Latch and Keys for Thule…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Will Replacement Locking Lever Latch and Keys for Thule RodVault Fit Denver Outfitter 4 Vault

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching