Tread Depth on Rambler ST235/80R16 Radial Trailer Tire

Question

Question:

Hi, whats the thread depth? Thanks John

asked by: John

0

Expert Reply:

Hi John; the tread depth on the Rambler ST235/80R16 Radial Trailer Tire # TA86GR is 8/32".

expert reply by: Robin H

0

Robin H.

1/27/2026

Hey John, did the 8/32 tread depth on the Rambler trailer tire meet your needs? Knowing how it performed could help others looking at the same tire.

Answer 1

I have another option for you, but the 15" wheel you have is a HWT series 01 which has been discontinued. You may be able to find one used that is in better shape, or may want to look into having the wheel refinished if you are partial to its…

view full answer...

Answer 2

There are really only two standard trailer tire sizes for 15" wheels, 205/75-15 and 225/75-15 with the latter being the taller option (28.4" diameter x 8.9" wide vs. 27.3" diameter x 8.1" wide). I recommend the Karrier…

view full answer...

Answer 3

I checked with Dexter, manufacturer of many trailer parts, and according to them there should be at least 1 inch of space between the tires when under load. So once your trailer is loaded and ready to tow, if you have more than 1 inch of space…

view full answer...

Answer 4

Hi Ritson; I'm sorry to say that the 15" Jaguar is no longer available. Lionshead is quick to discontinue wheels and since we are the only retailer that leaves the trailer manufacturers as the only other source. Since you already checked…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Tread Depth on Rambler ST235/80R16 Radial Trailer Tire

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching