Search: 12x2 brake shoes   >  

I know that has to be frustrating but the prices are determined by an algorithm and not set by someone. This causes price discrepancy's in similar products some times. We have the same brakes sold as a set the etrailer Electric Trailer Brake Kit…

I spoke with my contact at Bulldog and he confirmed that for coupler #BD4420000317 you would use latch repair kit #F670801. This repair kit actually fits several makes and models of couplers from Fulton and Bulldog.

To replace your AL-KO seal part 363497 you can use the double-lip seal set #RG06-070. These have an inner diameter of 2.250-inches (to match your spindle diameter) and an outer diameter of 3.376-inches (to match the bore on your 12 x 2-inch hub/drum…

We have a pretty close leaf spring that would work well with the part #e28SR which is 25-1/4 inches long from bolt center to bolt center and is for a 5,000 lb axle but we do not have the 5,200 lb version. As long as you wouldn't exceed the 5k…

I'm assuming you currently have electric brakes on your 5th wheel. The #KOD33FR and #HSE7K-T1 you looked at will fit your axles. Between the two, I recommend going with the Hydrastar Disc Brake Kit since it includes everything you need for a full…

The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…

If the power display on your Hopkins Agility brake controller drops from 10 to 0 when you apply the brakes this could mean that you are losing your trailer connection at the 7-way or that your controller is not correctly installed, meaning level and…

For that size Dexter axle there are two seals that potentially could be the correct one with the only difference being the inner diameter. If the ID is 2.125 the part you need is #RG06-090, if instead it's 2.25 then you'd need the part…

In order to replace the Dexter 023-359-00 left hand and 023-360-00 right hand braking assemblies you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 which will replace both sides and it's a direct bolt-on…

Trailer brake assembly #AKEBRK-7L-SA is a 12 x 2 inch assembly with a 5-bolt mounting pattern for 5.2K to 7K axles so it will fit in place of your existing 12 inch brakes! This is the left hand assembly. The matching right hand assembly is…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

Keep pumping grease into the fittings until you start to see a little grease seeping through the outer bearing. This means that you have packed as much grease as will fit into your spindle. Be sure to check that the grease isn't coming out the…