Is There a Reverse Lockout For Demco Disc Brake Actuator DM8758811

Question

Question:

What reverse lockout solenoid do you need for Demco Hydraulic Brake Actuator w/ Drop - Disc - Zinc - 2-5/16" Ball - 8,000 lbs Part Number: DM8758811 And is there a cover that fits it as well

asked by: Jason S

0

Expert Reply:

Hi Jason,

We do have a reverse lockout (and cover!) you can use with the Demco Hydraulic Brake Actuator w/ Drop # DM8758811, which is the Reverse Lockout Solenoid # DM11993 and Cover # DM11674-95.

Another option - if you don't have the actuator yet - is to just get the actuator with the solenoid and cover already on it so you don't have to do any installation. For that you'd need the Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout # DM8750311.

expert reply by: Kyle S

0

Jason S.

8/13/2024

Also will dm5836 work with the dm8758811 I was also told to use t4748800 So I’m not sure what Solenoid to use Because they all look the same . I’m trying to order this today from you . Thank you for the help

Kyle S.

8/13/2024

@JasonS The DM5836 is for a different Demco actuator so it wouldn't work, and the T4748800 is for Dexter actuators, so I'd stick with the # DM11993 and # DM11674-95.

Jason S.

8/13/2024

@KyleS thank you i just ordered all three .

Answer 1

The DA91 Demco surge brake actuator that you are looking for is part #DM8750311. This has a 2-5/16" coupler, comes with an electric lockout, is designed for disc brakes, and has a weight capacity of 8,000 lbs towing and 800 lbs tongue weight.

view full answer...

Answer 2

The #DM5939 is only compatible with the DA91 like the #DM8759131. Unfortunately, there is no option for manual lockout on a DA70 like the ##DM72VR. There are two ways you can keep your brakes from locking up with this brake actuator. The first is to…

view full answer...

Answer 3

I attached a picture that has the bolt hole dimensions of the Demco Hydraulic Brake Actuator #DM8759411 for you to check out but the distance between the two closer holes is 3 inches and the distance between the two holes further apart is 9-1/2…

view full answer...

Answer 4

We do have actuators that will work with a trailer that has disc brakes and an 8,000 lb GTW. The Titan #T4747200 may be a great option depending on the hitch ball size you need. It works with a 2-5/16" hitch ball, bolts onto 3" wide channel…

view full answer...

Answer 5

We have the perfect replacement for your Global Direct GDC-80 brake actuator. Since you mentioned "down tongue" I believe you were referring to having an actuator with drop. If you have disc brakes, the best option is the Demco Hydraulic…

view full answer...

Answer 6

Info on your coupler is harder to find but it looks like your coupler is a 8,000 lb rated surge brake actuator. Which for that we have the Titan kit part #T4747220 that is a disc brake actuator designed for disc brake use. Or we have the part…

view full answer...

Answer 7

We've got some nice options to replace the GDC-80 actuator you've got that will bolt up to a 3 inch channel tongue. I recommend using the Titan Zinc-Plated Brake Actuator - Disc #T4747200 (for disc brakes) or the Titan Zinc-Plated Brake…

view full answer...

Answer 8

Since the Titan Zinc-Plated Brake Actuator #T4750820 that you referenced has a weight capacity of 12,500 lbs and a tongue weight capacity of 1,250 lbs it will serve well as a replacement actuator for your application. The mounting holes are spaced…

view full answer...

Answer 9

To bleed the brake lines with your Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout #DM8750311 you'll need to complete the following steps: 1. First raise the tongue of the trailer 4" to 6". 2. Loosen or remove two 5/16”…

view full answer...

Answer 10

The Demco Hydraulic Brake Actuator #DM8750311 can be used to replace your Tie Down Engineering LP8000 actuator. The Demco comes with an electric lockout like you are wanting. It is zinc coated for corrosion resistance and fits a 2-5/16" hitch…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Is There a Reverse Lockout For Demco Disc Brake Actuator DM8758811

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching