Can Equal-i-zer System for 2 inch Hitch be Easily Converted to 2-1/2 inch Hitch

Question

Question:

I have a equal-i-zer 10000 weight distribution hitch and 1000 tongue weight for my 2021 jeep gladiator. I bought a new 2023 ram 2500 with a 2.5 reciver can I just change the shank Will the head fit the new 2.5 shank. Thank you Merritt

asked by: Merritt

0

Expert Reply:

Hey Merrit, yes you can swap just the shank of your current system so that it an be used in your new larger hitch size. All you would need is the correct shank like the part # EQ90-02-4800 that you referenced.

expert reply by: Jameson C

0

Merritt

8/13/2024

Thank you yesterday I ordered eq-02-4900 will that work just as good as eq-02-4800

Reply

Jameson C.

8/13/2024

@Merritt Yep! Only difference is the part # EQ90-02-4900 has more drop.

Reply

Answer 1

Thanks for the picture! The Equal-i-zer 2-1/2" Weight Distribution Shank item #EQ90-02-4800 that you referenced has 3/4" holes that are spaced 1-1/4" apart. If the head of your EAZ-Lift system has the same spacing then this shank would…

view full answer...

Answer 2

I went to the warehouse and measured the Curt Weight Distribution Shank for 2-1/2" Hitches #C17132 and it measures 9" from the center of the hitch pin hole to the end of the vertical portion of the shank. I have attached a diagram with some…

view full answer...

Answer 3

You can absolutely convert your Reese weight distribution hitch with a 2 inch shank to a 2-1/2 inch shank. Weight distribution hitch shanks can be mixed and matched so you can swap them out without any issue. For a 2-1/2 inch shank use the following:…

view full answer...

Answer 4

I went to the warehouse and measured the #EQ90-02-4800 for you. The hitch pin hole to the holes on the vertical leg of the shank measures 8 inches. The overall length is 12 inches. We do have another shank. It is part #EQ90-02-4900. The overall…

view full answer...

Answer 5

Hi Jordan! You are absolutely correct. The Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop #EQ90-02-4800 will work with your Reese weight distribution system, but you will need to adjust it a little due to the different…

view full answer...

Answer 6

Yes the Equal-i-zer weight distribution shank part #EQ90-02-4900 is essentially the exact same shank as the 90-02-4325 you mentioned with exact same dimensions and capacities.

view full answer...

Answer 7

Hi Pete! The Equal-i-zer 90-02-4425 is indeed the same as our part #EQ94FR. Typically we change a part number like this when the original part number closely matches another part number from a different manufacturer that we carry, which I think is…

view full answer...

Answer 8

Hey Kathy! Do you have a 2-1/2" hitch on your 2021 GMC Sierra 2500? Assuming you do, you can use the Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop #EQ94FR. If you have a 2" hitch then you need the…

view full answer...

Answer 9

Between using a reducer sleeve and upgrading your weight distribution shank, I recommend going with a weight distribution shank designed to fit the 2-1/2 inch hitch receiver on your 2015 Ram 2500HD. Using a 2/1/2 inch shank, like #EQ90-02-4800, for…

view full answer...

Answer 10

Yes, the Equal-i-zer Weight Dist Shank part #EQ90-02-4900 will work with the Fastway E2 weight distribution system such as the Fastway e2 Weight Distribution w/ 2-Point Sway Control part #FA94-00-0600. As long as the 10" of rise and 6" of…

view full answer...

Answer 11

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

view full answer...

Can Equal-i-zer System for 2 inch Hitch be Easily Converted to 2-1/2 inch Hitch

Product Page this Question was Asked From

Continue Researching