Will Camper Tie Downs Interfere With Installation Of Hellwig Rear Sway Bar?

Question

Question:

Will camper tie downs interfere with installation?

asked by: Wayne H

0

Expert Reply:

Hello Wayne. Frame mounted camper tie downs such as the Torklift brand tie downs will not interfere with the installation of the Hellwig Big Wig Rear Anti-Sway Bar # HE24MR. It is quite common for trucks with tie downs installed to also use aftermarket sway bars, so they are known to work together.

expert reply by: Jesse M

0

Wayne

8/1/2024

Thanks

Answer 1

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Answer 2

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 3

I have another option, but the HappiJac Truck-Mounted Camper Tie-Downs #LC236326-205221 (FT-DR10) you mentioned is only a confirmed fit for the 6-3/4' Bed. Since your 2019 Ram 3500 has the 8' Bed I recommend the TorkLift camper Tie-Downs…

view full answer...

Answer 4

For HappiJac Camper Tie Downs for your 2021 Ram 2500 8' bed we have part #LC236326-205221. This comes with both the front and rear tie downs.

view full answer...

Answer 5

Thanks for reaching out, David! It looks like HappiJac doesn't list any Ram fitments past the 2017 model year but we've been able to confirm this will fit with trucks past that year which is why we show the HappiJac Camper Tie-Downs…

view full answer...

Answer 6

Yes, the Hellwig Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE24MR is confirmed to fit the 2023 Ram 3500 models with the 6.7L diesel engine. This will work with 2WD/4WD models and is fine with dually models as well.

view full answer...

Answer 7

Hi Andrew; the Hellwig Big Wig Rear Anti-Sway Bar #HE24MR is specifically designed for Ram 3500 models with a diesel engine like yours. It is also a fit for the dually models so you can install it on your 2024 Ram.

view full answer...

Answer 8

Hey Charlie! Looking at your picture it doesn't look like you have any running boards. I'm also assuming you have the factory hitch, is that correct? If so, the tie-downs for your 2024 Ram 3500 are the TorkLift Tie Downs - Custom Frame Mount…

view full answer...

Answer 9

Since the 7-way round pin plug is obsolete, your best bet would be to replace the connector on your camper with the common 7-way blade style connector. You'd remove the existing plug on your slide in camper, and replace it with #A7WCB. You could…

view full answer...

Answer 10

The 6-pole sockets that we carry can only handle up to 12 gauge wire so the only way to really swap away from Lance's proprietary connector would be to treat it like a standard camper and switch to a junction box and 7-way connector like parts…

view full answer...

Answer 11

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will Camper Tie Downs Interfere With Installation Of Hellwig Rear Sway Bar?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching