Instructions For SeeLeveL RV Holding Tank Monitoring System

Question

Question:

Extremely disappointed that no directions were sent with the product I bought from you. I was unable to install this over the weekend. PLEASE send me detailed instructions for the installation of the products I purchased. I also need the details for wiring directly to the water pump NOT the 3-way Please send me a PDF ASAP. Thanks, Rick

asked by: Rick

0

Expert Reply:

Hey thanks for reaching out, Rick. We do have a PDF of the instructions for the SeeLeveL RV Holding Tank Monitoring System # SE99VR. You will find a link to the instruction below in the "featured help information" section. The installation guide starts on page 16. I hope this helps.

expert reply by: Jesse M

0

Jesse M.

2/3/2026

Hey Rick, were you able to get the SeeLeveL system wired to your water pump using the PDF instructions? Knowing how that process went could help others setting up the same monitor.

Answer 1

Yes we do carry the SeeLevel 709-2P with our part number #SE94VR. This is just the monitor you are looking for. The part #SE49VR that you mentioned includes the monitor but also sensors.

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

Hey Mark! Weigh Safe does not offer a locking pin for the True Tow #WS94RR hitch ball. I'm sure the thinking behind it is that you're either towing with a trailer hooked up so the ball can't be removed, or you aren't towing and store…

view full answer...

Answer 4

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 5

Hey Nisha, The SeeLevel Bluetooth enabled tank monitor 709-BTP7 can be purchased under part #SE74RR. If you need anything else or have any questions just let me know and I'd be happy to help.

view full answer...

Answer 6

I have a great replacement option for a GEH16EXT water heater but those are old and obsolete and they aren't available anymore. Instead you will want the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. It has smaller dimensions to the 10…

view full answer...

Answer 7

I'm seeing multiple dimensions for the Atwood GE16EXT RV water heater and all of them are quite a bit larger than the current models that we offer. With the change over to tankless systems manufacturers have also decreased the size as technology…

view full answer...

Answer 8

If you are looking for weight distribution trunnion bars, we do have replacement options. Because you specified square bars that narrows down your system to an Equal-I-zer. We have the Replacement Spring Bar for Equal-i-zer Weight Distribution…

view full answer...

Answer 9

11 inches from the bolt hole centers to the wall of the RV is the standard dimension for installing a 2 bolt toilet like the Dometic part #DOM87FR. You might check again and see if you didn't measure from the bolt centers and instead did from the…

view full answer...

Instructions For SeeLeveL RV Holding Tank Monitoring System

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching