Restoring A Boat Trailer And Looking For Bearing With 3/4" ID Bearing And 1-1/4" ID Bearing
Updated 07/25/2024 | Published 07/23/2024
Products Featured in This Question
Question:
I’m restoring a boat trailer and need a bearing kit. It’s a tapered spindle with 3/4” ID outer bearing and 1 1/4” ID inner bearing and 1 1/2” ID seal. The boat is 14’ aluminum fishing boat not very heavy. Can you recommend a bearing kit for a five stud hub. Thanks
asked by: Dan
Expert Reply:
Hello Dan, those a definitely some uncommon bearing sizes. It sounds like this trailer is pretty old and uses bearing sizes that are basically obsolete. We do have the Timken # TMK83VR bearing that has a 3/4" ID. This bearing is generally used on agricultural equipment or on certain older Ford or Dodge axles.
There are several bearings that have a 1.25" ID like the Timken # TMK55VR. The problem is not one of these bearings are really a match for the 3/4" ID bearing. So, there is not a kit that contains both these sizes.
Since this axle is so old, your best bet at this point will be to either have the spindles replaced or replace the axle entirely. Spindles can be tricky since installation requires specific precision equipment. Replacing the axle is generally much easier. If you want to look into it, I will need to know the weight capacity, and hub face length of the current axle. Feel free to drop that info in the comments below and I am happy to look and see what options we may have for you.
Product Page this Question was Asked From
Timken Replacement Bearing and Race Set #2 - LM11949 and LM11910
- Trailer Bearings Races Seals Caps
- Bearings
- Races
- Standard Bearings
- Standard Races
- .75 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- Timken
more information >
Continue Researching
- Search Results: yakima trailer parts
- Search Results: yakima kayak trailer
- Search Results: yakima trailers
- Search Results: wrench
- Search Results: yakima rack and roll
- Shop: Timken Replacement Bearing and Race Set #2 - LM11949 and LM11910
- Q&A: Replacement Axle Bolt and Nut Kit for Yakima Rack and Roll Trailer
- Video: All About the Timken Replacement Bearing and Race Set
- Search Results: bearing lm11949 trailer bearings races seals caps
- Search Results: lm11949 hub kit
- Shop: Replacement Axle Bolt Kit for Yakima Rack and Roll Trailers
- Shop: Yakima Rack and Roll Trailer - 78"
- Shop: Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer
- Shop: Lippert Grease Seals - Double Lip - ID 1.719" / OD 2.565" for 3,500-lb to 4,400-lb Axles
- Shop: Lippert Trailer Idler Hub Kit for 2,200-lb Axles - 13" to 15" Wheels - 5 on 4-1/2"
- Video: Review of the Heavy Duty Shocks for Yakima Rack and Roll Trailer
- Q&A: When Should the Heavy Duty Shocks for the Yakima Rack N Roll Trailer Be Adjsuted
- Shop: Yakima EasyRider Double Decker Trailer - 14-1/2' Long - 78" HD Crossbars - 500 lbs
- Video: Replacement Trailer Hub Bearing: The Breakdown
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: Replacement Axle for Old Trailer That Uses Hub Bearing L11949
- Q&A: Could CE Smith Trailer Axle Have New Holes Drilled at 40 inches Apart
- Q&A: Replacement Brakes and Bearings for 1993 Mastercraft Boat Trailer
- Q&A: How to Grease the Bearings on My Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Bearings Races Seals Caps
Dan
7/24/2024
Hi Jesse, anything wrong with pairing the 3/4” and 1 1/4” bearings that you have separately? And, is there a seal available?