Solution for Needing Replacement Thule Xsporter Clamp 7533220

Question

Question:

Hi there, Im looking for mounting clamps for my Thule Xsporter 422xt ladder rack. Thule part number is 7533220 Thanks, Pasha

asked by: Pasha

0

Expert Reply:

Hey Pasha, the Thule 753-3220 has been discontinued, but C Clamps that will work for 2016-current Toyota Tundra models are available as part # THXK4.

expert reply by: Jameson C

0

Jameson C.

2/3/2026

Hey Pasha, did the C Clamps for the Tundra end up working with your Thule Xsporter 422xt rack? Knowing how they fit could help others trying to replace the discontinued clamps.

Answer 1

Hey Tim, yes the replacement clamp #8523159001 does work with the 422XT Thule rack you have so it would be what you would want.

view full answer...

Answer 2

Someone else recently had the same question. Another expert contacted Thule and found that Replacement Bed Rail Clamp for Thule Xsporter Ladder Racks - Qty 1, #8523159001, does indeed fit the Thule Xsporter ladder rack 422XT! This is the same clamp…

view full answer...

Answer 3

The Thule Hullaport Pro part #TH849000 can fit into the top channels of a Thule Xsporter Pro ladder rack since it was designed for attaching to load bar top channels. This is a folding carrier like you wanted as well.

view full answer...

Answer 4

The correct replacement c-clamp which is the part that holds the base to the bed rail on the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part #TH500XT is part #8523159001. If you need the bolt that holds the c-clamp in place you will…

view full answer...

Answer 5

I do have a recommendation for you, however, Yakima does not make an adapter for the Yakima HullHound Kayak Saddles w/ Tie-Downs part Y04079 that will allow them to work with the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part…

view full answer...

Answer 6

I checked with Thule and for the replacement rubber stripping that goes on the top of the discontinued Thule Xsporter 422 truck rack system they list Replacement Rubber Strip #853-3544-23 as the correct part.

view full answer...

Answer 7

Hey Ryan. The Thule 422XT XSPORTER's been obsolete for awhile but we do have clamps that will work with it. They are the Replacement Bed Rail Clamp for Thule Xsporter Ladder Racks item #8523159001. For bolts that hold the c-clamps in place you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Solution for Needing Replacement Thule Xsporter Clamp 7533220

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching