Replacement C-Clamp for Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack

Question

Question:

Im looking for 1 C-Clamp for a Thule Multi-Height Xsporter 422. Part number 7533220. Do you guys have one or can you point me in the right direction?

asked by: Dustin

0

Expert Reply:

The correct replacement c-clamp which is the part that holds the base to the bed rail on the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT is part # 8523159001. If you need the bolt that holds the c-clamp in place you will have to go to a hardware store and look for one, it will be a 3/8"-16 X 3.0".

expert reply by: Conner L

0

Stewart

6/13/2026

So I have the 2024 Ford Ranger and the C clamps are not long enough! The inside lip of the bed is too long. Is there an after market clamp that could work? There don't seem to be lot of bed rack solutions for this model!

Jerred H.

6/14/2026

@Stewart I checked with Thule and looked at our options. We don't have anything that's going to be larger that'll work with your Ranger.

Stewart

6/14/2026

@JerredH Thank you! Looks like I have to return that and get something else. The bed rail on the 2024 Ranger is tricky!

Jerred H.

6/14/2026

@Stewart You're welcome! Yeah we don't have many options for the 2024 Rangers that's for sure. Just ones that mount to the top rails by the stake pockets like the Adarac Aluminum Series Custom Truck Bed Ladder Rack item # A72ZA.

See All (5) Replies to Stewart ∨

Answer 1

Yes, we do offer replacement bolts and hardware for the Thule TracRac TracONE Truck Bed Ladder Rack item #TH27000XT. I have listed them below: Replacement 3/8"-16 x 3" Button Head Cap Screw for Thule TracRac One item #TH28FK Replacement…

view full answer...

Answer 2

Someone else recently had the same question. Another expert contacted Thule and found that Replacement Bed Rail Clamp for Thule Xsporter Ladder Racks - Qty 1, #8523159001, does indeed fit the Thule Xsporter ladder rack 422XT! This is the same clamp…

view full answer...

Answer 3

Hey Tim, yes the replacement clamp #8523159001 does work with the 422XT Thule rack you have so it would be what you would want.

view full answer...

Answer 4

Hey Pasha, the Thule 753-3220 has been discontinued, but C Clamps that will work for 2016-current Toyota Tundra models are available as part #THXK4.

view full answer...

Answer 5

The Thule 753-3220 has been discontinued, but C Clamps that will work for 2016-current Toyota Tundra models are available as part #THXK4. The kit includes the necessary (8) 2-1/4 x 3/8 inch diameter bolts. Thule confirms that the kit is compatible…

view full answer...

Answer 6

The Toyota Tacoma Adapter Kit for Thule Xsporter Pro Ladder Rack - 2005 to 2015 #THXK3 will not work with the Thule Xsportster Multi-Height Aluminum Truck Rack 422xt that has been discontinued but it is confirmed to fit the Thule Xsporter Pro…

view full answer...

Answer 7

Yes. You can use the Replacement Bed Rail Clamp #8523159001 to mount your 422XT on your 2017 Toyota Tundra. This part works on the Thule Xsporter #TH500XT as well as the predecessor of that, the 422XT . If you also need the bolts, you can use the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Replacement C-Clamp for Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack

Products Featured in This Question

Continue Researching