Length of etrailer Trailer Idler Hub Assembly for 2,000-lb Axles and Bolt Pattern Fitment
Updated 07/04/2024 | Published 06/27/2024
Products Featured in This Question
Question:
Item AKIHUB-440-2-1K Referring to this item number just wanted to know what is the length of the hub, the bearings in this hub match my original hub which is good and the shaft on my axle is roughly 4 1/4inch just wanted to make sure this hub will work on my axle. One more question... Item AM20242 I know the hub and these wheels both say they are 4 on 4, but just wanted to double check that those wheels will work with those hubs, I was going to use the existing hubs but no stores in my area have any seals and I paid $XX for 4-L44643 bearings so I might as well get the complete hub with everything. And by the way I dont have much info on my trailer besides the title says its an SPCN and as for the year it says 00000 but it is a single axle utility trailer I guess 5foot x 10. Thanks for your help!!!
asked by: Zach B
Expert Reply:
Hey Zach, thanks for reaching out!
The Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-440-2-1K has a 4-1/4" length, and the Dexstar Steel Mini Mod Trailer Wheel # AM20242 4 on 4" bolt pattern will match the hub!
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Timken Bearing Kit Using L44643 Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Looking to Replace My 4.80 x 12 Trailer Tires with Tires and Wheels with 4 on 4 Bolt Pattern?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Article: Trailer Wiring Diagrams
- Article: How to Replace or Install an RV Roof Vent
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle