Replacement Spring For Opening Jaws On Trailer Coupler For 90's Big Tex Trailer

Question

Question:

Late 90 Big Tex trailer with Kodiak hitch. Looking for spring that opens 2 inch hitch jaws when unlocked

asked by: A.o. S

0

Expert Reply:

While I have no way to lookup the parts for your Kodiak Hitch on your Big Tex trailer I believe you are looking for a spring like the Bulldog Replacement # BD500354. This spring has an overall length of 1-7/8". If the spring you are looking for is different than this type please send me an image of your specific coupler and where the spring sits so I can verify if we have what you are needing.

expert reply by: Bud M

0

Jameson C.

2/17/2026

Hey, did the Bulldog replacement spring end up matching the one on your Kodiak hitch? Your update could make it easier for others trying to find the right spring for older Big Tex trailers.

Answer 1

I took a caliper out to our warehouse and measured the Replacement Spring for Ram Sleeve Lock Couplers part #CA-5196-SPR for you, the length is 1.68" and the diameter of the coil is .040".

view full answer...

Answer 2

Hey Dennis, it sounds like you have a Bulldog Collar Lock style coupler which we have replacement springs for with the part #BD500354.

view full answer...

Answer 3

Thanks for the photo; it looks like you have a low-profile latch and so the Replacement Coupler Cap Spring #BD500354 would work for your coupler.

view full answer...

Answer 4

It sounds like you might be needing the Replacement Coupler Cap Spring #BD500354 which fits the Bulldog Collar-Lok Couplers. If more than the spring is broken then we'll need to get you a completely new coupler. In this case let me know the what…

view full answer...

Answer 5

We do not have many replacement parts for Sleeve-Lock couplers like the item #CA-5196-B you were looking at. We just have the replacement spring item #CA-5196-SPR and the replacement pin item #CA-5196-PN.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Spring For Opening Jaws On Trailer Coupler For 90's Big Tex Trailer

Continue Researching