4-Way Wiring for 2024 Infiniti QX60

Question

Question:

I have a 2024 infinity qx60. It doesnt have the towing pkg. What all do I need for the 4 pin flat hookup and is it plug and play

asked by: Jerry

0

Expert Reply:

To add a 4-way to your 2024 Infiniti QX60 without the tow package you need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C95ZV. This is a plug and play installation so no cutting or splicing is required.

expert reply by: Robin H

0

Jerry

6/23/2024

Thanks

Answer 1

Yes, we have both a hitch and 4-way connector confirmed to fit your 2022 Nissan Pathfinder. The hitch that I recommend is the Draw-Tite Max-Frame Trailer Hitch Receiver #DT67GR. This hitch has a bolt-on, no-drill installation and will provide you…

view full answer...

Answer 2

There is a way to add a brake controller to your 2022 Nissan Pathfinder. Since you have a 7-way all you will need is the Curt Echo item #C51180. The Curt Echo simply plugs into your 7-Way connector and requires no cutting or splicing of wires. The…

view full answer...

Answer 3

The height of the Draw Tite hitch #DT67GR that fits your 2022 Nissan Pathfinder is not height adjustable.

view full answer...

Answer 4

Hi Gene; trimming will be required for the installation of the #EH53SR as seen in the picture below. EcoHitch doesn't host their installation instructions online for me to add a link but I did reach out to them and get a copy for you. I will send…

view full answer...

Answer 5

Hi Ross! We have two options for your 2025 Toyota RAV4 Hybrid, which I have listed below: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C77MJ EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH97FR These…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

4-Way Wiring for 2024 Infiniti QX60

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching