E-Track Recommendation for Installing on the Inside of a Carson Fun Runner Toy Hauler
Updated 05/08/2014 | Published 05/07/2014
Products Featured in This Question
Question:
I have a Carson fun runner toy hauler. Id like to mount 5 foot long sections of E track on the interior fender wells. I could cover the luan plywood with aluminum diamond plate first.
asked by: Kelly
0
Expert Reply:
Sounds like a good plan. For the 5 foot sections of the E-track you would want part # E19148. The # EM59150 that you referenced is sold in 2 foot sections.
You might also be interested in the E-Track Tie-Off Ring # 59131, E-Track Wood Beam Socket # 59149, and E-Track 2" D-Ring part # E59143.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1
- E Track
- E Track Rails
- Horizontal
- 5 Inch Wide
- 2000 lbs
- 2 Feet Long
- Erickson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Gauge Metal is the etrailer Horizontal E Track Made of?
- Q&A: Recommended E-Tracks and Straps for Towing a 4,000 lbs Car
- Q&A: Hydraulic Disc Brake Conversion For 2008 Trailer With Dexter 10K Axles
- Q&A: Is 3/4 Inch Plywood Floor Adequate for D-Ring Tie Down Anchors with Backing Plate for 3,000 lb Car
- Q&A: How Big Is The etrailer Enclosed Trailer Transition Plate # e32JR?
- Q&A: Can E-Track be Flush or Recess Mounted Instead of Surface Mounted
- Article: Rust Prevention
- Q&A: Recommendation to Convert Generator Power to 12V 7-way Trailer Connection
- Article: Trailer Tire Sizing
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Overview of Lubricating Grease