Will The Kodiak Lug Nut # KALN1375S Fit a 2022 Grand Design Imagine 17MKE?

Question

Question:

Would the Kodiaks also work for a 2022 Grand Design 17mke?

asked by: Todd F

1

Helpful Expert Reply:

Yes, the Kodiak Trailer Wheel Lug Nut # KALN1375S will fit your 2022 Grand Design Imagine 17MKE.

expert reply by: Bud M

1

Answer 1

Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.

view full answer...

Answer 2

Hello Chris, For your 2022 Grand Design Reflection 31MB 5th wheel with the MORryde CRE 3000 and wet bolt kit, the right crossmember brace is the MORryde X-Factor Crossmember #MR33WR. It helps stabilize your suspension, reduces stress by up to 94%,…

view full answer...

Answer 3

MORryde has a version of the X-Factor Crossmember that was designed to work with the CRE3000 you have with the part #MR33WR.

view full answer...

Answer 4

Hey David welcome back! I am not sure what you mean by angled pieces that get welded to the hanger. We have two types of X-Factor Crossmembers and one of them attaches directly to your frame hangers with included brackets and hardware. The MORryde…

view full answer...

Answer 5

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Andrew! Your trailer is not too light for the Comfort Ride suspension system. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM82MR is appropriately rated for the 3,500 lb axles you're upgrading to. This is…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

You sure do Greg! Which is why the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR comes with longer suspension bolts. These bolts will replace the ones currently being used on your trailer's spring hangers. The X-Factor…

view full answer...

Answer 10

Thanks for your question, Bryan! Sometimes it can be hard to get an exact measurement on the leaf springs. I'm not sure if you jacked up the trailer to let the axle hang when you took your measurement, that would be the ideal method, but it's…

view full answer...

Answer 11

Hey Tony! Since you have tandem 3,500 lb axles with a 2-3/8" diameter the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM82MR is the correct kit. The different part numbers are based on axle diameter and this one is…

view full answer...

Answer 12

Yes, the Roadmaster Comfort Ride Shock Absorbers part #RM-2460 will fit your trailer with 5,200 lb axles and a 33" wheelbase. The 5,200 lbs axles you have should be 3" diameter which is why this kit will work for you. I was able to speak…

view full answer...

Will The Kodiak Lug Nut # KALN1375S Fit a 2022 Grand Design Imagine 17MKE?

Continue Researching