Bearing Buddy Recommendation For 2000-LB Axle Hub Assembly
Updated 05/07/2014 | Published 05/06/2014
Products Featured in This Question
Question:
I have a utility trailer with 13inch wheels and 5 on 4-1/2 bolt pattern and 2000 lb axle.. The hubs are Dexter 8-259 and I want to replace them. It seems that either 8-258-50BTUC1 or 8-258-5UC1-EZ would be best for my needs. If I go with the first one which is galvanized, what Bearing Buddy model should I use? Thanks,
asked by: Rich B
Expert Reply:
For the Dexter Trailer Hub Assembly, part # 8-258-50BTUC1, the Bearing Buddy you would need is part # BB1980A-SS. This fits a hub bore of 1.980 inches. The Bearing Buddy system will keep water and dirt out of hubs and bearings while allowing the boat trailer wheels to be completely submerged.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: cotter pin
- Search Results: boat trailer rollers
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Correct Hub Assembly for Dexter 8-258 Hub and 13-Inch Wheels
- Q&A: Pre-Greased Idler Hub that Fits Adams Boat Trailer
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 440972
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Spindle Nuts, Washers, and Cotter Pins for 1" Axle - Qty 2
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Search Results: 7k magnet
- Search Results: k71~125~00
- Search Results: brake magnet
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement for Dexter 8-258 Trailer Hubs
- Q&A: Looking For Hubs For 1.25" Straight Spindle On 1941 Power Company Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Best Camper Jacks
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure a Trailer Axle
- Q&A: Trailer Hub that Fits Axle with 2,200 lb Capacity with 5 on 4-1/2 inch Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Tire Sizing