Availability of Replacement Backing Plate for 4,400 lb Lippert Drum Brakes

Updated 06/06/2024 | Published 05/31/2024

Products Featured in This Question

Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs

(9)

$171.60

Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles

(8)

$394.72

Question:

Replacement backing plate and 10inch drum/hub on 6-5.5 for Lippert V000315277 4,400lb axle. The backing plate has a PN B44EA-22 on the back of it.

asked by: Nate B

Right Hand Brake Assembly
(click to enlarge)

Expert Reply:

Hi Nate; the backing plate is not available as a replacement part so you will need the complete brake assembly. What you have in your picture is the # LC46WD. Brakes should be replaced in pairs so for the left and right hand brake assemblies you would need the # LC66WD.

expert reply by: Robin H

Nate B.

6/6/2024

What Hub/drum assembly would go with this Lippert axle and brake assembly?

Robin H.

6/6/2024

@NateB according to Lippert this uses the standard 3,500 lb bearings and grease seal so you could replace it with the Trailer Hub and Drum Assembly # AKHD-655-35-K you looked at. This has a 6 on 5-1/2 bolt pattern. If you want 5 on 4-1/2 you can use the # AKHD-545-35-EZ-K.