Will Timbren Front Suspension Kit Work on a 2016 Nissan Titan XD

Question

Question:

Dear sir, 2016 Nissan Titan XD 5.0 diesel. Looking for front suspension enhancement kit. Will part TFXF1004A work because the lower controle arm sit in an angle. Later I will do a 2inch lift Do you have any actual pics of this kit installed on a Titan XD 2016 model? Because its an expensive kit and do not want to destroy it in off road conditions because of not sitiing correct on the angeled lower controle arm. Kind regards

asked by: Anwar

0

Expert Reply:

Hi Anwar, thanks for reaching out!

The Timbren Front Suspension Enhancement System # TFXF1004A will fit just fine on your 2016 Nissan Titan XD, although we don't have any photos of this installation as of yet. Timbren has confirmed this will fit so you can be confident it will work as it's designed to work.

expert reply by: Jon G

0

Anwar

5/15/2024

Thanks for responding. Waiting for pictures to sent for me. The lower control arm of the Titan XD is at a high angle. Want to see how it will fit. Must be some angled spacer to install it on the Titan XD LCA. Otherwise it will damage the bump. Kid regards, Anwar

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

When connecting two batteries together on an RV trailer you usually connect the batteries in parallel to draw 12 volts from both of the batteries. We have a photo, see photo at right, that shows how to wire the batteries in parallel. Once you have…

view full answer...

Answer 3

The purpose of the Hughes Autoformers Voltage Booster with Surge Protection - 30 Amp, #HU24FR is not to continually boost 15 amp service to 30. For 30 amp service at your house you simply need to run a 30 amp line with a properly matched receptacle.…

view full answer...

Answer 4

Typically as long as you're staying at or below 200 degrees you're doing fine. The fact that one hub is hotter than the other could just mean that you had more weight over that one hub or that the brake setting was more aggressive on that hub…

view full answer...

Answer 5

Hey Albert, thanks for reaching out. I see you already have an order in for the Timbrens, but I still wanted to reply to your question. Yes, you can use Timbrens, or other similar suspension enhancement products in conjunction with a weight…

view full answer...

Answer 6

We do indeed carry Optronics products. The number you provided is a DOT reference number, and does not denote the part number of the lamp or the lens. However we had a picture sent in once from a guy of the housing of the light he needed a lens for…

view full answer...

Answer 7

To install an additional Furrion Solar Panel, #FR73SR to your current system, you will need the manufacturer part number FSEB30JWP-BL that should be included with the panel. Please note the attached image from Furrion showing how to wire a second…

view full answer...

Answer 8

Hello again Dave; the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-449-00 may fit your trailer but you will need to measure to be sure. When you replace shackle straps and equalizers you want them to match what you already have so…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will Timbren Front Suspension Kit Work on a 2016 Nissan Titan XD

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching