Correct 1/2 Wheel Stud for Dexter 7K Axle
Updated 12/20/2022 | Published 12/19/2022
Question:
Is there a way to interchange an AL-KO part# 1530093 to a Dexter wheel stud part number? It is for a Dexter 7K Axle as shown in the attached images.
asked by: Anonymous
0
Expert Reply:
The correct wheel stud for a Dexter 7K Axle with 1/2" Wheel Studs is the Dexter Wheel Bolt part # 7-262 which is cross-compatible with the AL-KO 1530093.
expert reply by:
Conner L
0
Correct 1/2" Wheel Stud for Dexter 7K Axle
(click to enlarge)
(click to enlarge)
Correct 1/2" Wheel Stud for Dexter 7K Axle
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Wheel Bolt - 1/2" Diameter - 2-11/16" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-11/16 Inch Long
- Redline
more information >
Continue Researching
- Search Results: 1/2 inch studs
- Search Results: studs
- Search Results: trailer hubs and drums
- Search Results: boat flags
- Search Results: dexter wheel studs
- Search Results: axle studs
- Search Results: trailer axles
- Shop: Lippert Drive-In Wheel Stud - 5/8" Diameter x 3-7/16" Long - 0.689" Knurl - Qty 4
- Shop: Lippert Drive-In Wheel Stud - 9/16" Diameter x 2-5/16" Long - 0.617" Knurl - Qty 4
- Shop: Lippert Drive-In Wheel Stud - M22 x 1.5 Thread Size x 4-13/16" Long - 1.007" Knurl - Qty 4
- Shop: Dexter Wheel Bolt - 1/2" Diameter - 2-11/16" Long - Qty 1
- Shop: DeeMaxx 13" Hub-and-Rotor Assembly - 8 on 6-1/2 - Maxx Coating - 8,000 lbs - 9/16" Studs
- Video: Complete Breakdown of the Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4"
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Shop: Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)
- Q&A: Replacement Wheel Stud for Dexter 3,500 lb Trailer Hub
- Video: Review of Dexter Trailer Hubs and Drums - Hub with Integrated Rotor - DX82UR
- Q&A: What Is The Best Quality One-Piece 1/2" - 20 Lug Nut That Is Also Made In The USA?
- Q&A: Replacement Trailer Wheel for Dexstar Wheel 17-293
- Video: Comprehensive Review: Spring-Eye Bolt with Locknut for Slipper Springs
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Axle EZ Lube Grease Caps 2.72 Inch OD - DX49HR
- Video: Spring-Eye Bolt with Locknut for Slipper Springs: The Breakdown
- Video: Review of Dexter Trailer Hubs and Drums - E-Z Lube Pre-Greased Trailer Hub Drum - 42866UC3-EZ
- Shop: Brake Controller
- Video: Installation of the TruRyde Equalizer for 2" Wide Slipper Springs
- Q&A: Where Does Brake Controller Plug Into on 2016 Ford F-450 Cab/Chassis and 2016 E-450 Cab/Chassis
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Recommended Replacement Oil Bath Cap Kit for Dexter 21-36
- Shop: Trailer Wiring
- Q&A: How to Determine if a 7K Dexter Trailer Axle Hub has 1/2 Inch or 9/16 Inch Studs