Replacement Hook to Attach Safety Chains to Curt Ball and Safety Chain Loop Kit

Question

Question:

I have a 2024 GMC 2500HD with the curt puck gooseneck fitting. The clevis hooks on my current trailer are too small to fit the puck system. Do you have a hook or safety chains that will fit? My current safety chains are 5/16 Grade 70 18,800lbs breaking strength.

asked by: Carl O

0

Expert Reply:

To attach your safety chains to the # C38CR on your 2024 Sierra 2500 you can replace the hooks with the Curt Clevis Hook with Spring Loaded Safety Latch # C81970. These are large enough to attach to the Curt system.

expert reply by: Robin H

0

Answer 1

Hello Marc, I am sorry for the delay in response. I have looked into every extender we have, and I do not see how you would be able to use any of them and be able to tow safely. With other weight distribution systems you can change out the shank for…

view full answer...

Answer 2

There is indeed a safety chain kit that is designed to be used with the ProPride 3P Weight Distribution Hitch w/ Sway Control for 2-1/2" Receivers #PR47QR. The correct part for this hitch is the Wiring and Safety Chain Extension Kit for ProPride…

view full answer...

Answer 3

Both the ProPride 3P part #PR57QR and the B and W Continuum part #BW78FR allow backing up and work extremely well but since there isn't a ProPride system that would be ideal for the tongue weight of your Winnebago Minnie FLX2306 I would go with…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 6

Hey Brian! The BTBRV Trailer Jack Foot Scale #BTBRV014 is not designed to live on your trailer jack permanently. If you're traveling or storing your trailer you definitely want to remove it and replace it with your standard foot. If you're at…

view full answer...

Answer 7

Hey Marc! The +/-5% accuracy specification refers to the scale's measurement tolerance. On a 2,000-lb capacity scale, that works out to about +/-100 lbs. at full capacity. As you pointed out, if you were measuring a much lighter tongue weight,…

view full answer...

Answer 8

Hey Jim, you can do both ways with the part #BTBRV014 if you like but it really comes down to what you are wanting the tongue weight info for. If you want to know your tongue weight without WD system hooked up then do it without the system hooked up.…

view full answer...

Answer 9

Hey Steve! The Big Truck Big RV Trailer Jack Foot Scale #BTBRV014 does not include the SnapPad. If you want to install one on your scale for additional ground contact and stability you will need to order the SnapPad Jack Stand Pad #SN47FR separately.…

view full answer...

Replacement Hook to Attach Safety Chains to Curt Ball and Safety Chain Loop Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching