Safety Chain Extension Kit For Pro Pride 3P Weight Distribution For 2-1/2" Hitch PR47QR

Question

Question:

Is there a safety chain extension kit for the ProPride 3P Weight Distribution Hitch w/ Sway Control for 2-1/2" Receivers - 14K GTW, 1.4K TW Item # PR47QR?

asked by: Devin

0

Expert Reply:

There is indeed a safety chain kit that is designed to be used with the ProPride 3P Weight Distribution Hitch w/ Sway Control for 2-1/2" Receivers # PR47QR.

The correct part for this hitch is the Wiring and Safety Chain Extension Kit for ProPride 3P # PR34QR.

expert reply by: Kyle S

0

Answer 1

We have universal fit tow mirror options that we know fit your 2014 Ford Expedition since we have test fit them and used them here like with the K-Source part #KS3891-2 but the CIPA mirrors that you referenced are a custom fit mirror that does not…

view full answer...

Answer 2

To attach your safety chains to the #C38CR on your 2024 Sierra 2500 you can replace the hooks with the Curt Clevis Hook with Spring Loaded Safety Latch #C81970. These are large enough to attach to the Curt system.

view full answer...

Answer 3

Hello Marc, I am sorry for the delay in response. I have looked into every extender we have, and I do not see how you would be able to use any of them and be able to tow safely. With other weight distribution systems you can change out the shank for…

view full answer...

Answer 4

Both the ProPride 3P part #PR57QR and the B and W Continuum part #BW78FR allow backing up and work extremely well but since there isn't a ProPride system that would be ideal for the tongue weight of your Winnebago Minnie FLX2306 I would go with…

view full answer...

Answer 5

Yes, The Wiring and Safety Chain Extension Kit #PR34QR will work with your Hensley hitch per the manufacturer. This kit will help you if your chains and cables do not extend 24 inches past the end of the hitch box. The working load of the chains is…

view full answer...

Answer 6

Personally I feel the SumoSprings Solo Custom Helper Springs #SSR-127-54 are a better option for more users on a 2024 Ford F-250 than the Timbren #TFR250SDJ. The SumoSprings are more more progressive and will provide a better ride quality when…

view full answer...

Answer 7

Your thinking is 100% correct here. RV black water drains will be a standard 3" size, which is the internal diameter of the pipes, so the Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug #T58 will…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Safety Chain Extension Kit For Pro Pride 3P Weight Distribution For 2-1/2" Hitch PR47QR

Featured Help Information

Miscellaneous Media

Continue Researching