Replacement Bearings, Grease Seal And Hub Assembly For A 2002 Shorlandr WaveRunner Trailer
Updated 05/01/2024 | Published 04/30/2024
Products Featured in This Question
Question:
I have a 2002 Shorelander waverunner trailer. It has Dico 45263 hub 5 on 4 1/2. The bearings are both L44649 and seal not sure correct one 12404. I think the races are ok. What bearings and seal should I need? Is it normal for both to be the same bearing number. Another option is to change the whole hub assembly to be newer, what hub assembly you recommend. Thank you, John
asked by: John
Expert Reply:
Hey John,
It's normal for 2k axles to use the same bearings for both the inner and outer so the # L44649 could be the correct fit for both if that's what you found stamped on them. If the grease seal says 12404 then the # TMK36ZR may be a fit based on what I can find for this seal. I'd prefer to get some measurements on your spindle to confirm fitment though. You can measure points B, C, and D on the diagram below with a digital caliper # PTW80157 to confirm the inner diameter for the grease seal and bearings.
Shorelandr is one company that does actually offer a little bit of info if you have the VIN of the trailer. If you can email that to me separately I can see what records they have for your trailer.
Product Page this Question was Asked From
Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.69 Inch I.D.
- 2.56 Inch O.D.
- 3700 lbs Axle
- 4200 lbs Axle
- Dexter
more information >
Continue Researching
- Search Results: bearing seal
- Search Results: castle nut
- Search Results: spindle nut
- Video: An In-Depth Look at the Timken Grease and Oil Seal
- Video: Review of CE Smith Trailer Axles - Axle Spindle Parts - CES52QR
- Video: A Closer Look at the Double Lip Grease Seals (pair)
- Video: Checking Out the Timken Grease Seal
- Video: What to Know About the Trailer Hub Assembly
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 1-1/16 Inch BTR Spindle - DX59UR
- Shop: Timken 203029 Grease Seal - Single Lip - I.D. 1.250" / O.D. 1.983" for 2K to 2.5K Axles
- Q&A: Replacement Grease Seal For ShoreLand'r Boat Trailer With 1.25" ID, 2" OD, and Width of 1/2"
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: CE Smith Trailer Wheel Bearing Kit for Straight Spindle - LM67048 Bearings - 16306A Grease Seal
- Shop: Double Lip Grease Seal - 1.500" ID - 1.987" OD
- Shop: CE Smith Spindle Nuts, Washers, and Cotter Pins for 1" Axle - Qty 2
- Shop: Timken 470706 Grease and Oil Seal - I.D. 1.249" / O.D. 1.983" for 2K to 2.5K Axles
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Q&A: How to Choose Correct Replacement Trailer Idler Hub
- Q&A: Galvanized Hub For 2000 ShoreLandr Boat Trailer With 1-1/16 Bearing
- Q&A: Does Trailer Hub Seal Width Need to be Measured to Pick Out Replacement
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Q&A: Trailer Hub that Fit Axle Spindle that is 1-1/16 inch In Diameter for Both Bearings
- Q&A: Replacement Grease Seal for GS-1250DL
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
on Trailer Bearings Races Seals Caps
