What Hardware Comes With The Replacement Hardware Kit # RHK?

Question

Question:

Your item RHK, what all is included in the hardware kit?

asked by: Stephen C

0

Expert Reply:

The Replacement Hardware Kit # RHK is going to have the correct mounting hardware for whichever Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese trailer hitch receiver you need it for. This is the reason for the Hitch Item Number box so we can ensure you get the correct hardware for your application.

expert reply by: Bud M

0

Stephen C.

6/5/2024

Sorry it took so long to get back to you. For my hitch it is a Draw Tite. Part Number CEQ 75713 My connector is a curt, part number 55774.

Answer 1

Hey Don. I have a solution for you, but that part is not available anywhere as far as I can tell. The only custom fit part our vendors offer as replacement is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C55316…

view full answer...

Answer 2

We can get that hardware for you. You'll need part #RHK. Use the provided link to get to the product page. In the proper field, type in the hitch part number, which is C13379, then from the drop down menu, choose Curt.

view full answer...

Answer 3

Hey Russel, We have the Replacement Hardware Kit #RHK that gets you all of the replacement hardware for your hitch once you input the Curt Hitch Part #C11028 into the hitch number section. We don't have a way to separate all of the parts out and…

view full answer...

Answer 4

Yes, when you order the Replacement Hardware Kit for Trailer Hitches #RHK and input Draw-Tite and 75774 in the selection boxes then you will get everything that comes in the hardware kit for the Draw-Tite Max-Frame Trailer Hitch Receiver #75774.…

view full answer...

Answer 5

To order replacement hardware for the Curt hitch part #C11181 all you need is the part #RHK. On the product page you will need to enter the part number for the hitch and select Curt from the drop down menu and we will ship you out the correct install…

view full answer...

Answer 6

I attached a 7-way diagram that you can use as a wiring guide for installing the 7-Way kit part #PK11-934 that you referenced. You'd want to use the middle picture's wiring colors.

view full answer...

Answer 7

The Fastener Kit #01685 that you referenced is a supplement to the installation hardware included with the Draw-Tite Max-E-Loader Trailer Hitch Receiver #41504, or the Reese 37081 or 44143 hitches. This fastener kit is more or less spacers and you…

view full answer...

Answer 8

Drilling is required to install Draw-Tite trailer hitch #DT45502 on a 1988 Ford F-250. You will need to drill eight 1/2 inch holes to secure the hitch to the bottom of the vehicle frame. I have included a link to the installation instructions for…

view full answer...

Answer 9

Shane, sorry to say we don't have a replacement hardware kit by itself for the B&W Turnoverball #BWGNRK1313. The hardware actually does not look like it's offered by B&W themselves, unfortunately. What I did instead is attach a…

view full answer...

Answer 10

I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block #RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are…

view full answer...

Answer 11

We do offer a replacement hardware kit, part #RHK, for all of the hitches we carry. All you need to do is enter the part number and manufacturer of the hitch on the product page, hit add to cart, and place your order and we will ship you replacement…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What Hardware Comes With The Replacement Hardware Kit # RHK?

Product Page this Question was Asked From

Continue Researching