Availability of Fastway e2 Shank No Longer Than 9-1/2 Inches

Updated 04/14/2024 | Published 04/13/2024

Products Featured in This Question

Fastway e2 Weight Distribution Shank - 12" Long - 7-3/4" Rise, 5-1/4" Drop - 1.2K TW

(27)

$164.22

Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs

(28)

$164.98

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW

(169)

$568.42

Question:

Looking for a Shank which handles 800 Lbs TW, 2x2, 8,000 lb GTW. Used for e2 Trunnion Hitch. Total Length of Shank not to exceed 9.5. I wish your products would list the overall measurements.

asked by: Paul S

Expert Reply:

The majority of our WDH shanks have the dimensions listed either in the description or on a diagram. Regardless, 9-1/2" is very short and only one out of everything available comes close. The # AMAC1 has an overall length of 9-15/16". There is nothing shorter than this. The distance from the center of the shank holes to the center of the hitch pin hole is 6-3/4" and it has a drop of 2-5/8" and rise of 7-3/8" when used with trunnion bars. This is compatible with the Fastway e2 # FA92-00-0800.

expert reply by: Robin H