Recommended Replacement Vintage Wheels for a 1973 Holiday Rambler
Updated 04/09/2024 | Published 04/07/2024
Question:
Hello, I have a 73 Holiday Rambler that we have renovated. It has the original dexstar 4 lug wheels. Last year one of them had a catastrophic. The rim cracked completely around each lug nut. When we pulled over the lug nuts were loose so I assumed that allowed the steel to bend and work till it cracked. We replaced that rim and have taken a few trips since then. This last week another rim did the same thing but the lugs were not loose. I’m assuming the problem is caused by the twist that occurs while turning the dual axles. I’d like to keep the vintage style but do you know if this is a common problem? The replacement rims are made from a thicker gauge steel. Do you know if this change was to address this problem? I don’t want to spend the money on replacements if they will fail in this way as well.
asked by: Philip D
(click to enlarge)
Expert Reply:
Phillip, I don't know that to be certain but I'd imagine that's why the replacements # AM20312 are made from thicker steel.
Also, with the lug nuts being loose - that's usually associated with under-torqueing, over-torqueing, differential thermal contraction, and improper mating surfaces, so I'd say that may have been the snowball that caused the wheels to break.
I'm confident with the new thicker wheels and properly torqued lug nuts, that you won't have this issue again.
Continue Researching
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Search Results: rv steps
- Q&A: How to Select the Correct Hub to Change Out a 4 on 9.44 Inch Bolt Circle Wheels with 5 on 4-1/2
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: 4 on 944 hubs
- Shop: 14 Gauge, 7 Conductor Jacketed Wire - Per Foot
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Search Results: trailer lights
- Search Results: 7 wire
- Search Results: trailer hitch
- Search Results: gen~y torsion
- Search Results: gen~y hitch trailer hitch ball
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
on Trailer Tires and Wheels
