Dimensions of Malone MicroSport to LowBed Trailer Conversion Support Tubes

Question

Question:

what are the dimensions of this product?

asked by: Mark

0

Expert Reply:

The Malone MicroSport to LowBed Trailer Conversion Support Tubes # MAL33TR are 40" long and 1-1/4" wide.

expert reply by: Robin H

0

Answer 1

Yes, if you order the Malone MicroSportXT Trailer part #MPG460XT from us, it will come with the new galvanized heavy duty crossbars but I cannot guarantee others will not have old stock. The photo has not yet been updated to show the bar change but…

view full answer...

Answer 2

I checked to see if there was conversion kit to convert your Malone high bed trailer to a low bed #MPG464-LB. I know this isn't going to be ideal, but what you can do is reuse the U-bolts from the cross bars you have now, and reattach the cross…

view full answer...

Answer 3

The Bunk Kit for Malone Trailers #MPG561 is designed to fit the 1-1/4" Crossbars #MPG4001 currently used on Malone trailers. You can still use them with your crossbars but will need to account for the difference in size with some flat…

view full answer...

Answer 4

Since you already have the Malone MicroSport Trailer - Galvanized Steel - 13' Long - 78" Crossbars - 800 lbs #MPG460G already comes with the Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475. It sounds like you are just…

view full answer...

Answer 5

The Malone Crossbar Conversion Kit item #MPG475 comes with two 78" crossbars that are 13-3/4" tall when put together. The crossbars are made of 1-1/4" square steel so you will have about 11" - 11-1/4" of a gap inside the…

view full answer...

Answer 6

To convert your Malone MicroSport Trailer #MPG461GU to carry your Bote Rover SUP/Micro skiff you will need a couple parts to use it with launching at the boat ramp. First you will need the Malone MicroSport to LowBed Trailer Conversion Support Tubes…

view full answer...

Answer 7

Hi there Bob; you can definitely back into the water to launch your dinghy using the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870. The hubs have a dust cap but aren't sealed so water can still get in them. To ensure no water gets in,…

view full answer...

Answer 8

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

view full answer...

Answer 9

We can piece together a Malone Lowbed trailer by first starting with the part #MPG464-LB and then a single bunk kit part #MPG561 and then the spare kit part #MPG465 and you'd be set. There isn't a kit with just the parts you are looking for…

view full answer...

Dimensions of Malone MicroSport to LowBed Trailer Conversion Support Tubes

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching