How to Measure For Replacement Awning

Published 03/13/2024

Question:

Looking to replace the complete awning along with arms and trailer bracket. The awning is 12ft and the pole on trailer is 8ft 6 in the outside slide release pole is 3 ft 7in and the inside slide is 4ft 2. I am not sure on how measurements actually go but here is my try.

asked by: Joe R

Expert Reply:

Hi Joe; so to measure for a replacement awning what you need to do is measure from center to center of your current awning's arms. This will give you the correct awning width. You mentioned 12 feet for the awning, so for example if yours measured 12 feet wide center to center on the arms you could use the Solera XL 12V Power RV Awning - 12' Wide # LCV000334919-362241.

I have added a link below to our entire selection of complete awning kits which you can filter through by width.

expert reply by: Kyle S