Is The Smart LED Light Strip # DIA86QR One or Multiple Strips?

Question

Question:

Is the LED strip actually 32 feet long? or is it two separate 16 foot strips than can be linked? and this can be wired to 12vdc correct? not 24vdc?

asked by: Garrett R

0

Expert Reply:

The Smart LED Light Strip # DIA86QR is a 32' long single strip. It has connectors on both ends so it can be connected in series. The lights can be powered by either 12 volt or 110 volt power but not 24 volt.

expert reply by: Bud M

0

Answer 1

The LED Light Strip Kit #DIA86QR can be plugged into a 12-volt AC outlet, if that what you meant by regular house plug in your motorhome and it does not come with a transformer.

view full answer...

Answer 2

After doing some research you can link up to three complete LED strips #DIA86QR end-to-end without adding in extra, higher gauge power wire or additional power supply units down the line. If you have any further questions please reach back out to me…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Louie, Yes, that is a great question. You do not have to worry about the air bags interfering with your B&W Turnoverball hitch setup. The Firestone Ride-Rite Air Bags with Easy Mount Compressor and In-Cab Control #F84XV are compatible with in-bed…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Craig, thanks for reaching out. Yes, they will! The TorkLift StableLoad Suspension Upgrade #TLA7200 will indeed work with the Timbren bump stops on your 2025 Chevy 3500HD. The StableLoads mount under the overload spring, while the bump stops…

view full answer...

Answer 9

Hey Jeff, Depending on how much clearance you need from that tailgate is going to determine what kind of hitch extender you will need. Assuming you just have a factory 2" hitch receiver on your Ram you could go with the hitch extender #e48YR…

view full answer...

Answer 10

Hey John, welcome back! I do have a way better functional solution for you. It's the Brandmotion Tailgate Delete Backup Camera with Wiring Harness item #BM67JR. This camera attaches to your license plate bracket. The other end will connect to the…

view full answer...

Answer 11

Hey Michael congrats on the new truck! The social media group is 100% correct. Adding a sway bar to the rear of your 2026 Ford F-250 is definitely going to help with sway. However, I've got a better option since you're getting sway going slow…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Is The Smart LED Light Strip # DIA86QR One or Multiple Strips?

Product Page this Question was Asked From

Continue Researching