Will Atwoood Propane Detector # AT36720 replace Older Atwood LP Gas Detector

Question

Question:

We need to replace our wired LP Gas Detector in our fifth wheel asap. I have included a picture of the one we currently have. We have a 2018 Heartland Bighorn 3270 RS 5th wheel. I did contact Heartland apparently Atwood no longer manufactures the one we have. They werent any help suggesting a suitable replacement. The AT36720 appears to be the same size and shape and would fit the cutout in the wall, but Id like expert advice. Ive also seen a model AT36719 that looks like it might work. Any help is appreciated, we want to get it replaced as this is a life safety issue. Thank you.

asked by: Erin L

0

Expert Reply:

Yes, the Atwood Propane Detector part # AT36720 that you referenced will work in place of the Atwood detector you have currently. The dimensions match and it will keep you safe from propane leaks going unnoticed.

expert reply by: Jameson C

0

Atwood LP Detector
(click to enlarge)

Answer 1

Based on the picture you provided the Atwood RV Propane Gas Detector - 12 Volt - White #AT36720 would be an exact replacement for your current Atwood RV Propane Gas Detector.

view full answer...

Answer 2

The Atwood RV Carbon Monoxide and Propane Gas Detector #AT36681 is going to be the closest replacement to your ProTECHtor GS961LP-RV. It requires a 3-9/16" long x 3-7/16" wide x 1" deep cutout hole and will alert you to both unsafe…

view full answer...

Answer 3

For a replacement you could use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black). These are made in the USA with imported parts. If you want the version that also detects CO we have the #RS34FR or #RS54FR as well.

view full answer...

Answer 4

Hey Wayne, to replace the Atwood propane gas detector you have now you could use the part #AT36681 which also is a carbon monoxide detector.

view full answer...

Answer 5

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 6

I recommend the #RS34FR to replace your current LP gas detector. This is a simple 2 wire design making for easy installation.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Will Atwoood Propane Detector # AT36720 replace Older Atwood LP Gas Detector

Continue Researching