What is The Purpose of the Pegs on the Better Bath RV Kitchen Sink # LC92ZR?

Question

Question:

can yo tell us what the plastic pegs are under the sink? we are repacing the undermount with the in so do holes need drilled for the pegs to be ed? cant find video explaining. thanks

asked by: Mary

0

Expert Reply:

The pegs on the Better Bath RV Kitchen Sink # LC92ZR provide mounting holes to secure the top of the sink to the countertop when mounted in a top mount configuration. The holes are designed to fit the cutout opening so you may need to enlarge your sink opening so they fit correctly. Lippert does not include any mounting hardware so you will need to source the correct screw diameter and length depending on your counter thickness.

expert reply by: Bud M

0

Answer 1

The closest sink I was able to find to what you're needing is the Better Bath RV Kitchen Sink #LC92ZR. This sink measures 25" long x 17" wide x 6-7/8" tall making this 1/4" longer and 2-1/2" less wide, has an interior…

view full answer...

Answer 2

The closest we carry to what you're looking for is the Better Bath RV Kitchen Sink #LC92ZR which measures 25" long x 17" wide x 6-7/8" tall and is grey in color. We do have other sizes that are longer, but the widest sinks we have…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The best way to pick out a transmission cooler is to go with a larger one that fits in the available area in front of your 2018 Nissan Frontiers radiator. The most popular option (for good reason) we have is the Derale cooler part #D13503 which…

view full answer...

Answer 8

Thanks for the picture and your patience! I did some research and made some phone calls, the correct replacement for your actuator is the Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs item…

view full answer...

What is The Purpose of the Pegs on the Better Bath RV Kitchen Sink # LC92ZR?

Continue Researching