Do the Yakima Replacement Bolts Come w/ Nuts?

Question

Question:

Do the Yakima 2 1/4 bolts come with the nuts to tighten on the ski rack, bike rack etc.?

asked by: Rob U

0

Bolts
(click to enlarge)

Expert Reply:

Thanks for the picture! The Yakima Replacement Bolts - 1/4" x 2-1/4" item # Y80011 do not come with nuts. However, judging by the parts you have in your picture I think you need the Replacement Mounting Hardware for Yakima Roof Mounted Ski and Snowboard Carriers item # 8830021. It fits the carriers manufactured after 2006.

expert reply by: Jerred H

0

Replacement Hardware
(click to enlarge)

Answer 1

The Replacement Hardware Bag for Yakima Mako Saddles, LandShark Saddles, HullRaiser or Kayak Stacker #Y8840018 does look similar to the parts you are needing for your Yakima ButtonDown ski and snowboard carrier. But, it is not the correct kit that…

view full answer...

Answer 2

The Yakima MightyMounts 4H are no longer available. I contacted Yakima for a solution for you and there are two options. The Universal MightyMounts #Y03590 is one. The benefit here is that if you needed to use them with another Yakima product…

view full answer...

Answer 3

I called Yakima to find which part you needed. For your older ButtonDown ski rack, you can you the Replacement Mounting Hardware for Yakima Roof Mounted Ski and Snowboard Carriers, part #8830021. The only thing you will need to do to use this with…

view full answer...

Answer 4

For replacement T-bolts for the Yakima LoadWarrior you need the part #Y8870068 and then for knobs part #Y8870048. The other side of the bolts are not tightened as they are designed to be fixed and the knob tightens against them.

view full answer...

Answer 5

Thank you for the photo of your 1980's vintage Yakima Space Booster rooftop cargo box. I do understand and admire your interest in keeping that old box in use. I myself am "that guy" too. However, my contact at Yakima said they have not…

view full answer...

Answer 6

For the older Yakima SpaceBooster all we have is the Yakima Replacement Luggage Knobs #Y8870048 which is new knobs. Since the box is so old the rest of the parts for the box have been discontinued.

view full answer...

Answer 7

The correct wing nuts for the Yakima Replacement Long Mounting Bolts, #Y8870068, are the Yakima Luggage Knobs, #Y8870048. The luggage knobs come in a package of 8 to match the replacement bolt kit. The specs of the bolts and wing nuts are not listed…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Do the Yakima Replacement Bolts Come w/ Nuts?

Continue Researching