Replacement Idler Hubs For Boat Trailer With UFP Hub and 1.68 Grease Seals
Updated 02/06/2024 | Published 02/05/2024
Products Featured in This Question
Question:
Hi there! Im looking to replace my old UFP hubs on my boat trailer. Im having trouble finding an exact match. The specs of my current setup are below. Let me know if you have any that should work. Most Ive seen that are close have different sized races and grease seals, but didnt know if this would be okay with my tapered spindle. Thanks! 5 on 4.5 hub Inner Bearing: L68149 Inner Race: L68110 Outer Bearing: L44649 Outer Race: L44610 Grease Seal: 1.68 ID and 2.33 OD
asked by: Aaron F
Expert Reply:
You are going to have to get the Grease Seal # 168255TB and replace the seal included with either the Easy Grease # AKIHUB-545-35-G-EZ-K or Standard Hub # AKIHUB-545-35-G-K. We do not have any hub kits which come with the 1.68" inner diameter seal as a kit currently. Both the hubs above are galvanized so they will last longer on your boat trailer since they are more corrosion resistant than a standard painted hub.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What is Height of Power Mountain Tallboy Off Road Bottle Jack When Retracted and Extended
- Search Results: tall boy jack
- Search Results: bunks boat trailer parts
- Search Results: trailer spindles
- Search Results: trailer hubs
- Q&A: Lowest Height of Power Mountain Tallboy Off-Road Bottle Jack with Axle Saddle Equipped
- Q&A: Width of Power Mountain Tallboy Off-Road Bottle Jack Saddle Attachment
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Help Identifying And Replacing Hubs And Spindles On An Old Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to 26-3/4" Lift - 2 Tons
- Q&A: Can Bunk Brackets Work as Replacements for Welded On Supports