This lightweight aluminum trailer wheel resists rust and features a gloss black finish with machined spokes. Snap-in blue inserts add a bold accent to your setup. Built for everyday trailers, haulers, and campers.
The gloss black wheel with machined spokes already has a clean, finished look - but snap-in blue inserts take it further. They sit flush in the spokes and add just the right pop of color to help your setup stand out without looking overdone. It's easy to change the vibe without repainting or committing to a whole new look.
Unlike steel wheels, this one won't rust or peel. The aluminum keeps the weight low and the look intact, even after miles on the road. It's one less thing to worry about if your trailer sits outside or sees regular use.
For smaller cargo or utility trailers, this wheels 1,740-lb load rating hits the mark. You're not overpaying for capacity you don't need, but you're still covered for weekend runs, yard work gear, or that lightweight camper.
This rim uses a standard 5 on 4-1/2 bolt pattern, so it bolts right onto most light-duty trailer hubs without any weird spacing or adapters. If you're replacing an old wheel, it'll drop right in without a headache.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this aluminum AM06 series, 13-inch, black-machined, trailer wheel with blue inserts. Now, this lightweight aluminum trailer wheel is going to resist rust and it features a gloss black finish with machined spokes. That's going to add just enough contrast to stand out without being over top, over the top rather. Now, what's nice about this wheel, as you can see this does include blue inserts. It's going to add a somewhat of a bold accent to your setup.
And so, this wheel is going to come with these inserts in a separate box, ready to be installed. And I want to walk through just how quick these are going to be to install. So I have all them installed, except this one here. Now, what you're going to have here, inside of the spoke segments here, are going to be these bolts. And you're going to want to remove those bolts, and then you'll take the insert, and you'll just kind of snap it into place, just like that.
And then this is also going to come with this theft-deterrent tool, that's going to be able to loosen and tighten the bolts. I'm just going to go ahead and tighten that up. And so, what's nice about this feature is, not only do you have the ability to add these inserts, but if for whatever reason you want to use this wheel without the inserts, that's not going to be a problem. You just remove the inserts. Now, you can also, if you decide to change up the color a little bit, we do also carry a fire engine, red inserts.
So you can pick those inserts up separately if you wanted to change up the color here. But as you can see, it literally takes just a matter of seconds to get those inserts in place. So this, again, is going to be for the wheel with the blue inserts, but maybe you're wanting the wheel with the red inserts. That's no problem because we do carry that. And on your screen, I am including the model number there for that wheel with the red inserts.
And then if you just want the wheel without the inserts, then we do carry that as well. So, again, if you decide that you want, if you've had this for a while and you decide to go with without the blue, that's fine, or if you want to go with the red, we do also carry those inserts separately. Now, this wheel is rated for up to 1,740 pounds, so that's going to be great for most small cargo, utility, or boat trailers. It's a solid fit when you want to carry gear without stressing your wheel or wondering about your load limits. Looking at the measurements here, I mentioned this is a 13-inch wheel, so that's the diameter measuring bead seat to bead seat, 13 inches. And then the width, again, measuring bead seat to beat seat is 4-1/2 inches. This is a 5 on 4-1/2-inch bolt pattern. The wheel bolt size is 1/2-inch by 20. This does not include a center cap, but if you decide to pick one up, you just need to make sure that it fits the pilot diameter of 3.19 inches. Now, if you do pick this up, we would love to hear back from you regarding your experience with getting this installed and using it. And if you write a review on this product page, you can actually share photos of this on your setup, and I would love to see what this looks like with your particular setup, especially with these inserts in place. So you can drop a comment or, again, leave a review and share some pictures with us. But if you have any other additional questions, don't hesitate to reach back out to us. We do want to make sure that you're getting what you want and need. I think that's going to wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Excellent Priduct!! Fast Shipping!
They look great on my Scamp camper! I haven't put a mile on them yet but that will be the real test for a quality wheel.
Got them a day early, and WOW, they are absolutely beautiful. Love them, going on a food trailer, will send pictures when the trailer wrap is finished
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.