Possible Replacement Snap-On Cover for an Extang Tonneau Cover on a 2004 Dodge Ram 1500 Short Bed

Question

Question:

I have a 2004 Dodge Ram 1500 short bed pickup. It has an Extang fulltilt. I need a new cover. I cannot read the number as tag is worn. It fastens with snaps and has arched supports. I could take pictures if needed.

asked by: Jeanene T

0

Expert Reply:

I did some digging around and it looks like the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1770 could work depending on if this is actually what you have or not.

This cover is the replacement for the Extang BlackMax 2770 which is a fit for a 2004 Dodge Ram 1500 Short Bed, and uses snaps to come on and off.

expert reply by: Bryce D

0

Answer 1

If you can provide the serial number from the tarp, which is found printed on the underside of the tarp up near the front, I can get the correct replacement tarp from Extang (assuming you have an Extang Platinum tonneau cover). If you'd care to…

view full answer...

Answer 2

I am happy to determine the replacement cover for you but I would need the serial number off of your older Extang cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side front…

view full answer...

Answer 3

We have four different replacements for covers that fit a 2006 Dodge Ram with a 6-foot bed, though you would need some information about your current cover to choose the correct one. Cover #EX37770 is the replacement for the Extang FullTilt SL Soft…

view full answer...

Answer 4

It looks like you have the Extang BlackMax #EX2770 which fits your 2003 Dodge Ram with the 6-1/2 foot bed. Good news the replacement tarp is part #EX1770.

view full answer...

Answer 5

To identify the correct replacement vinyl kit for your truck's soft roll-up tonneau cover we will need to know your 1500's bed length, either 5-1/2-foot or 6-foot, whether the truck has the Ram Box feature, and which series of Extang soft…

view full answer...

Answer 6

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

Yes Bryan, HappiJacs says "Power drill with 1/2" hex socket can be used to raise or lower jacks when not bearing weight". Another thing you can do for the HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs…

view full answer...

Answer 11

Dexter recommends a SAE 90, SAE 80W-90 or SAE 75W-90 oil to be used. I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs #XLPROLUBE as it is a synthetic 90 weight oil that helps reduce friction and to keep bearings cool. Since your cap was…

view full answer...

Possible Replacement Snap-On Cover for an Extang Tonneau Cover on a 2004 Dodge Ram 1500 Short Bed

Continue Researching