Dimensions of Brophy Ball Mount # BH40 from Pinhole to Edge of Ball Mount

Question

Question:

re: Brophy BH40 Ball Mount- Whats the dimension from center of pinhole to the nearest end the end opposite of the hitch ball hole Thanks- Dave

asked by: David S

0

Expert Reply:

I spoke with my contact at Brophy and she told me the measurement from the center of the pinhole to the nearest edge of the ball mount opposite the hitch ball hole is 2-1/2 inches.

I have included a diagram that shows the requested dimensions.

expert reply by: Chris O

0

click to enlarge

Answer 1

Hey Nick, congrats on the new Sprinter. The Tekonsha Custom Harness item #3063-P does fit the green connector that is under your seat in your 2025 Mercedes Benz Sprinter 2500. It's compatible with the E98 prep package option as shown in the…

view full answer...

Answer 2

Hey Dave, the install harness part #3063-P does fit to the green connector that is under your seat in your 2025 Mercedes Benz Sprinter 4500 and would work great with the P3 part #90195 which is widely considered to be the best controller around. I…

view full answer...

Answer 3

Hi Alex, great question and I’m glad you dug into that because the material really does matter for long term durability. I reached out to DeeMaxx to confirm, and these lug nuts part #DE55KR are made from 304 stainless steel. That’s a very common and…

view full answer...

Answer 4

I have an option that may work for you, but we do not have a ball mount with 4" rise, a 1-1/4" shank hole, and is 13" - 14-1/2" long. The closest option we have is the Draw-Tite Ball Mount for 2" Hitches - 3" Rise,…

view full answer...

Answer 5

A Dexter 3,500 lb axle will have a hub that uses 1/2" lug nuts, so the correct part is the CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" #CE11051.

view full answer...

Answer 6

The Brophy Ball Mount #BM20 and the Brophy #BH20 referenced in your question are extremely similar to each other. They are both designed for 2 inch trailer hitch receivers, have a 10,000 pound towing weight capacity, feature a long, 13-1/4 inch shank…

view full answer...

Answer 7

Hello Nathan, thanks for reaching out. Yes, there is! You can use the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball #C45912 with the Lock N Roll 3-Position Adjustable Channel Bracket #LR74VR. The dual ball fits a 3" channel with…

view full answer...

Answer 8

Yes, the RockTamers Mudflap part #ERT00110 would be compatible with the The WeightSafe 2-1/2 inch ball mount #WS6-25 that you referenced. We had a customer come back and tell us that the two products worked well together.

view full answer...

Dimensions of Brophy Ball Mount # BH40 from Pinhole to Edge of Ball Mount

Product Page this Question was Asked From

Continue Researching