Availability Of 12" Long Ball Mount With 1-1/4" Hitch Ball Hole And 3" Rise
Products Featured in This Question
Question:
I have a follow-up for this question about this that I am hoping you can help me with. It turns out the new travel trailer is actually lower, so I need only 3” of rise (as opposed to 4” as I initially stated). Do you have a ball mount/ball combination that could work for a 2 5/16 ball, 3” rise and 13-14.5 length (hole to hole)? Thank you!
asked by: Francisco Z
Helpful Expert Reply:
I have an option that may work for you, but we do not have a ball mount with 4" rise, a 1-1/4" shank hole, and is 13" - 14-1/2" long.
The closest option we have is the Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 12" Long - 12,000 lbs # 4285 which is 12" long and has a 3" rise. For this option you would use 2-5/16" hitch ball # BWHB94003 which has a 3-1/4" long shank and has a 1" rise to get you back up to 4" total rise.
If your new trailer is under 6000lbs I recommend is keeping the Curt # D-28 you currently have and using the Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" XL Shank - Nickel # 105TB which has a 1" shank diameter and a 3" long shank.
I included videos for each of the products mentioned for you to take a look at.
(click to enlarge)
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Long Shank
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Hitch
- Shop: Front Mount Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - Off-Road Mode - Proportional
- Q&A: Hitch Extender that is At Least 3-1/2 Inches Deep From Pin Hole to Inside Receiver Tube
- Video: The Low-Down on the Brophy Ball Mount for 2" Hitch
- Video: An In-Depth Look at the Roadmaster Hitch Extender for Tow Bars
- Video: Hands-On with the 2-5/16" Hitch Ball
- Search Results: 2 hitch extension
- Search Results: extended hitch
- Search Results: hitch adapters
- Search Results: trailer hitch ball
- Search Results: brophy trailer hitch ball mount
- Search Results: curt hitch extender
- Search Results: draw~tite trailer hitch
- Video: Review of Redarc Jeep Brake Controller Wiring Harness - RED93RR
- Shop: RockyMounts Hitch Extender w/ Hitch Pin and Lock - 2" Hitches - 8" Long
- Shop: Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
- Shop: Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Shop: Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Video: Mount: Curt Trailer Hitch Receiver on a 2021 Jeep Wrangler
- Video: In-Depth Review of the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness
- Q&A: Easy Installation Brake Controller Recommendation for a 2024 Jeep Wrangler with Factory Tow Package
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Video: Finding the Right Trailer Wiring Harness
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Trailer Hitch Ball Mount
Francisco Z.
4/14/2021
I have a follow-up for this question about this that I am hoping you can help me with. It turns out the new travel trailer is actually lower, so I need only 3” of rise (as opposed to 4” as I initially stated). Do you have a ball mount/ball combination that could work for a 2 5/16 ball, 3” rise and 13-14.5 length (hole to hole)? Thank you!