Recommended Tire Chains for a 2024 Mercedes-Benz Sprinter 2500

Question

Question:

I need tire chains for my 2024 Mercedes-Benz Sprinter 2500, what do you recommend

asked by: Wyatt

0

Expert Reply:

For your 2024 Mercedes-Benz Sprinter 2500 I recommend checking out the pewag Snox Pro Tire Chains # PWSXV590. These chains are self tensioning, fits 15" to 18" tires, and will provide you with excellent traction in the snow or ice.

expert reply by: Bryce D

0

Answer 1

Hey Brooks, thanks for reaching out, and good call thinking ahead for a Vermont winter. Yes, we do have chains that will fit your 2021 Winnebago Revel on the Sprinter 2500 4x4 chassis with 265/70R17 tires. With the tight clearances you mentioned (1…

view full answer...

Answer 2

Hey Mark, While the pewag Wide Base Tire Chains #PW94FR will technically fit around the 275/70-18 tires on your 2018 Ram 2500, this set of chains will actually be too big and we need to get you a smaller size so they fit properly. For your…

view full answer...

Answer 3

For heavy duty tire chains for your 2016 Mercedes-Benz Sprinter 2500 with 245/75R16 tires I recommend the Titan Chain Alloy Snow Tire Chains #TC2524 due to the heavy duty square links made out of manganese nickel alloy, and the built in chain…

view full answer...

Answer 4

I don't know your tire size so I am not able to verify the fit of either chain but since you mentioned off road applications the thicker links of the #TC2524 would be the better option as the bigger link does provide more traction.

view full answer...

Answer 5

There sure is! The correct locking pins for the Curt Channel Style Adjustable Ballmount - 5-1/4" Rise, 6-3/4" Drop - 6,000 lbs #C45901 is the Curt Lock Set #C23556. This set includes one lock to lock the ball mount section to the channel,…

view full answer...

Answer 6

The Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 #UF48-979004 have a load capacity of 6,000 lbs each. They extend from 11- 17 inches tall and are not intended for lifting, but only stabilizing your trailer. These…

view full answer...

Answer 7

Since your Terry is currently sitting on/sinking into soft ground I recommend, if at all possible, pulling it without wheels to a nearby level paved surface so that you can safely use jack stands like #UF48-979004 to lift it enough to mount new…

view full answer...

Answer 8

The base dimensions of the Ultra-Fab Stackable Stabilizers #UF48-979004 that you referenced measure 6" x 6" at the bottom. I have attached a picture to demonstrate this.

view full answer...

Answer 9

For your system due to the unique width, I recommend the Timbren Axle-Less Trailer Suspension System - 2,200 lbs #ASR1THDS02. This system has the integrated suspension and just needs a 2 inch square tube (not included) to fit into the integrated…

view full answer...

Answer 10

You could be experiencing one of 2 separate issues or a combination of both. If the side at 38 degrees is the passenger side I have seen this a lot as that side of the trailer typically experiences the worst ride quality from damage to the edge of…

view full answer...

Answer 11

Hey John, I am afraid that the info in that previous question you read is still going to hold true. The BT 15118 and 09074 bearing sizes are obsolete and are no longer readily available. Nor are there any suitable substitutes that we can offer. At…

view full answer...

Answer 12

Hey John, thanks for reaching out. Yes, the Roadmaster Direct-Connect Base Plate Kit #RM-521448-5 will indeed fit your 2013 Jeep Wrangler Rubicon with the factory plastic bumper. I double checked with Roadmaster and verified the fit. It'll pair…

view full answer...

Recommended Tire Chains for a 2024 Mercedes-Benz Sprinter 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching